FCS950U 模块做热点模式是，电脑和苹果15同时连接，苹果15会断开，电脑则不受影响。
而且苹果在连接后，内核会疯狂打印
Line 100002: Apr 15 01:34:46 hi-target kernel: [ 651.046127] sc2355 sprd-wlan:sprdwl_intf_fill_msdu_dscr, 862, sta disconn, no data tx!
Line 100003: Apr 15 01:34:46 hi-target kernel: [ 651.046135] unisoc_wifi sprd-wlan wlan0: sprdwl_start_xmit drop msg due to TX Err
Line 100004: Apr 15 01:34:46 hi-target kernel: [ 651.046171] sc2355 sprd-wlan:sprdwl_find_lut_index,1,bssid not found, multicast?
Line 100005: Apr 15 01:34:46 hi-target kernel: [ 651.046171] default of AP = 4
Line 100006: Apr 15 01:34:46 hi-target kernel: [ 651.046188] sc2355 sprd-wlan:sprdwl_intf_fill_msdu_dscr, 862, sta disconn, no data tx!
Line 100007: Apr 15 01:34:46 hi-target kernel: [ 651.046196] unisoc_wifi sprd-wlan wlan0: sprdwl_start_xmit drop msg due to TX Err
Line 100008: Apr 15 01:34:46 hi-target kernel: [ 651.046233] sc2355 sprd-wlan:sprdwl_find_lut_index,1,bssid not found, multicast?
Line 100009: Apr 15 01:34:46 hi-target kernel: [ 651.046233] default of AP = 4
Line 100010: Apr 15 01:34:46 hi-target kernel: [ 651.046242] sc2355 sprd-wlan:sprdwl_intf_fill_msdu_dscr, 862, sta disconn, no data tx!
Line 100011: Apr 15 01:34:46 hi-target kernel: [ 651.046249] unisoc_wifi sprd-wlan wlan0: sprdwl_start_xmit drop msg due to TX Err
Line 100012: Apr 15 01:34:46 hi-target kernel: [ 651.046284] sc2355 sprd-wlan:sprdwl_find_lut_index,1,bssid not found, multicast?
Line 100013: Apr 15 01:34:46 hi-target kernel: [ 651.046284] default of AP = 4
hostapd 配置文件如下：
interface=wlan0
driver=nl80211
ctrl_interface_group=0
ctrl_interface=/var/run/hostapd
beacon_int=100
ssid=wl_test
country_code=CN
channel=36
hw_mode=a
ieee80211n=1
#ieee80211ac=1
ht_capab=[HT20][HT40+][HT40-][SHORT-GI-40][SHORT-GI-20]
#vht_capab=[SHORT-GI-80]
#vht_oper_chwidth=1
#vht_oper_centr_freq_seg0_idx=42
auth_algs=3
wpa=2
wpa_passphrase=12345678
wpa_key_mgmt=WPA-PSK
wpa_pairwise=CCMP