?? [0000.065] I> MB1 (version: 1.4.0.4-t234-54845784-e89ea9bc) [0000.070] I> t234-A01-1-Silicon (0x12347) Prod [0000.074] I> Boot-mode : Coldboot [0000.077] I> Entry timestamp: 0x00000000 [0000.081] I> last_boot_error: 0x0 [0000.084] I> BR-BCT: preprod_dev_sign: 0 [0000.088] I> rst_source: 0x0, rst_level: 0x0 [0000.092] I> Task: SE error check [0000.095] I> Task: Bootchain select WAR set [0000.099] I> Task: Enable SLCG [0000.102] I> Task: CRC check [0000.105] I> Task: Initialize MB2 params [0000.109] I> MB2-params @ 0x40060000 [0000.113] I> Task: Crypto init [0000.116] I> Task: Perform MB1 KAT tests [0000.120] I> Task: NVRNG health check [0000.123] I> NVRNG: Health check success [0000.127] I> Task: MSS Bandwidth limiter settings for iGPU clients [0000.133] I> Task: Enabling and initialization of Bandwidth limiter [0000.139] I> No request to configure MBWT settings for any PC! [0000.145] I> Task: Secure debug controls [0000.148] I> Task: strap war set [0000.152] I> Task: Initialize SOC Therm [0000.155] I> Task: Program NV master stream id [0000.160] I> Task: Verify boot mode [0000.165] I> Task: Alias fuses [0000.169] W> FUSE_ALIAS: Fuse alias on production fused part is not supported. [0000.176] I> Task: Print SKU type [0000.179] I> FUSE_OPT_CCPLEX_CLUSTER_DISABLE = 0x000001c8 [0000.184] I> FUSE_OPT_GPC_DISABLE = 0x00000002 [0000.189] I> FUSE_OPT_TPC_DISABLE = 0x000000f0 [0000.193] I> FUSE_OPT_DLA_DISABLE = 0x00000003 [0000.197] I> FUSE_OPT_PVA_DISABLE = 0x00000001 [0000.201] I> FUSE_OPT_NVENC_DISABLE = 0x00000001 [0000.206] I> FUSE_OPT_NVDEC_DISABLE = 0x00000000 [0000.210] I> FUSE_OPT_FSI_DISABLE = 0x00000001 [0000.215] I> FUSE_OPT_EMC_DISABLE = 0x0000000c [0000.219] I> FUSE_BOOTROM_PATCH_VERSION = 0x7 [0000.223] I> FUSE_PSCROM_PATCH_VERSION = 0x7 [0000.227] I> FUSE_OPT_ADC_CAL_FUSE_REV = 0x2 [0000.231] I> FUSE_SKU_INFO_0 = 0xd5 [0000.235] I> FUSE_OPT_SAMPLE_TYPE_0 = 0x3 PS [0000.239] I> FUSE_PACKAGE_INFO_0 = 0x2 [0000.242] I> SKU: Prod [0000.244] I> Task: Boost clocks [0000.247] I> Initializing NAFLL for BPMP_CPU_NIC. [0000.253] I> BPMP NAFLL: fll_lock = 1, dvco_min_reached = 0 [0000.258] I> BPMP NAFLL lock success. [0000.261] I> BPMP_CPU_NIC : src = 42, divisor = 0 [0000.266] I> Initializing PLLC2 for AXI_CBB. [0000.270] I> AXI_CBB : src = 35, divisor = 0 [0000.274] I> Task: Voltage monitor [0000.278] I> VMON: Vmon re-calibration and fine tuning done [0000.283] I> Task: UPHY init [0000.288] I> HSIO UPHY init done [0000.291] W> Skipping GBE UPHY config [0000.294] I> Task: Boot device init [0000.298] I> Boot_device: QSPI_FLASH instance: 0 [0000.302] I> Qspi clock source : pllc_out0 [0000.307] I> QSPI Flash: Macronix 64MB [0000.310] I> QSPI-0l initialized successfully [0000.314] I> Task: TSC init [0000.317] I> Task: Load membct [0000.320] I> RAM_CODE 0x4000421 [0000.323] I> Loading MEMBCT [0000.326] I> Slot: 0 [0000.328] I> Binary[0] block-3840 (partition size: 0x40000) [0000.333] I> Binary name: MEM-BCT-0 [0000.337] I> Size of crypto header is 8192 [0000.341] I> Size of crypto header is 8192 [0000.345] I> strt_pg_num(3840) num_of_pgs(16) read_buf(0x40050000) [0000.351] I> BCH of MEM-BCT-0 read from storage [0000.355] I> BCH address is : 0x40050000 [0000.359] I> MEM-BCT-0 header integrity check is success [0000.364] I> Binary magic in BCH component 0 is MEM0 [0000.369] I> component binary type is 0 [0000.373] I> strt_pg_num(3856) num_of_pgs(115) read_buf(0x40040000) [0000.380] I> MEM-BCT-0 binary is read from storage [0000.384] I> MEM-BCT-0 binary integrity check is success [0000.390] I> Binary MEM-BCT-0 loaded successfully at 0x40040000 (0xe580) [0000.396] I> RAM_CODE 0x4000421 [0000.402] I> RAM_CODE 0x4000421 [0000.406] I> Task: Load Page retirement list [0000.410] I> Task: SDRAM params override [0000.413] I> Task: Save mem-bct info [0000.417] I> Task: Carveout allocate [0000.420] I> RCM blob carveout will not be allocated [0000.425] I> Update CCPLEX IST carveout from MB1-BCT [0000.430] I> ECC region[0]: Start:0x0, End:0x0 [0000.434] I> ECC region[1]: Start:0x0, End:0x0 [0000.438] I> ECC region[2]: Start:0x0, End:0x0 [0000.443] I> ECC region[3]: Start:0x0, End:0x0 [0000.447] I> ECC region[4]: Start:0x0, End:0x0 [0000.451] I> Non-ECC region[0]: Start:0x80000000, End:0x280000000 [0000.457] I> Non-ECC region[1]: Start:0x0, End:0x0 [0000.462] I> Non-ECC region[2]: Start:0x0, End:0x0 [0000.466] I> Non-ECC region[3]: Start:0x0, End:0x0 [0000.471] I> Non-ECC region[4]: Start:0x0, End:0x0 [0000.482] I> allocated(CO:43) base:0xbe000000 size:0x4000000 align: 0x200000 [0000.489] I> allocated(CO:39) base:0x27de00000 size:0x2200000 align: 0x10000 [0000.496] I> allocated(CO:20) base:0x27a000000 size:0x2000000 align: 0x2000000 [0000.503] I> allocated(CO:24) base:0x278000000 size:0x2000000 align: 0x2000000 [0000.510] I> allocated(CO:28) base:0x276000000 size:0x2000000 align: 0x2000000 [0000.517] I> allocated(CO:22) base:0x27c000000 size:0x1000000 align: 0x1000000 [0000.524] I> allocated(CO:35) base:0x275000000 size:0x1000000 align: 0x100000 [0000.531] I> allocated(CO:02) base:0x27d000000 size:0x800000 align: 0x800000 [0000.538] I> allocated(CO:03) base:0x274800000 size:0x800000 align: 0x800000 [0000.545] I> allocated(CO:06) base:0x274000000 size:0x800000 align: 0x800000 [0000.552] I> allocated(CO:56) base:0x273800000 size:0x800000 align: 0x200000 [0000.559] I> allocated(CO:07) base:0x27d800000 size:0x400000 align: 0x400000 [0000.566] I> allocated(CO:33) base:0x273400000 size:0x400000 align: 0x200000 [0000.573] I> allocated(CO:19) base:0x273180000 size:0x280000 align: 0x10000 [0000.580] I> allocated(CO:23) base:0x27dc00000 size:0x200000 align: 0x200000 [0000.587] I> allocated(CO:01) base:0x273000000 size:0x100000 align: 0x100000 [0000.594] I> allocated(CO:05) base:0x272f00000 size:0x100000 align: 0x100000 [0000.600] I> allocated(CO:08) base:0x272e00000 size:0x100000 align: 0x100000 [0000.607] I> allocated(CO:09) base:0x272d00000 size:0x100000 align: 0x100000 [0000.614] I> allocated(CO:12) base:0x272c00000 size:0x100000 align: 0x100000 [0000.621] I> allocated(CO:15) base:0x272b00000 size:0x100000 align: 0x100000 [0000.628] I> allocated(CO:17) base:0x272a00000 size:0x100000 align: 0x100000 [0000.635] I> allocated(CO:27) base:0x272900000 size:0x100000 align: 0x100000 [0000.642] I> allocated(CO:42) base:0x272800000 size:0x100000 align: 0x100000 [0000.649] I> allocated(CO:54) base:0x273100000 size:0x80000 align: 0x80000 [0000.656] I> allocated(CO:34) base:0x2727f0000 size:0x10000 align: 0x10000 [0000.663] I> allocated(CO:72) base:0x2725f0000 size:0x200000 align: 0x10000 [0000.669] I> allocated(CO:47) base:0x272000000 size:0x400000 align: 0x200000 [0000.676] I> allocated(CO:50) base:0x271e00000 size:0x200000 align: 0x100000 [0000.683] I> allocated(CO:48) base:0x2725d0000 size:0x20000 align: 0x10000 [0000.690] I> allocated(CO:69) base:0x2725b0000 size:0x20000 align: 0x10000 [0000.697] I> allocated(CO:49) base:0x2725a0000 size:0x10000 align: 0x10000 [0000.704] I> NSDRAM base: 0x80000000, end: 0x2725f0000, size: 0x1f25f0000 [0000.710] I> Task: Thermal check [0000.713] I> Using min_chip_limit as min_tmon_limit [0000.718] I> Using max_chip_limit as max_tmon_limit [0000.723] I> BCT max_tmon_limit = 105 [0000.726] I> BCT min_tmon_limit = -28 [0000.730] I> BCT max_tmon_limit = 105 [0000.733] I> BCT min_tmon_limit = -28 [0000.737] I> SKU specific max_chip_limit = 105 [0000.741] I> SKU specific min_chip_limit = -28 [0000.745] I> BCT max_chip_limit = 105 [0000.749] I> BCT min_chip_limit = -28 [0000.752] I> enable_soctherm_polling = 0 [0000.756] I> max temp read = 34 [0000.759] I> min temp read = 33 [0000.762] I> Enabling thermtrip [0000.765] I> Task: Update FSI SCR with thermal fuse data [0000.770] I> Task: Enable WDT 5th expiry [0000.774] I> Task: I2C register [0000.777] I> Task: Set I2C bus freq [0000.780] I> Task: Reset FSI [0000.783] I> Task: Pinmux init [0000.786] I> skipped mmio_addr = 0x9240008 [0000.790] I> skipped mmio_addr = 0x9240000 [0000.794] I> skipped mmio_addr = 0x9240010 [0000.798] I> skipped mmio_addr = 0x9240018 [0000.802] I> skipped mmio_addr = 0x9240020 [0000.806] I> skipped mmio_addr = 0x9240030 [0000.810] I> skipped mmio_addr = 0x9240028 [0000.814] I> skipped mmio_addr = 0x9240038 [0000.818] I> skipped mmio_addr = 0x9240040 [0000.822] I> skipped mmio_addr = 0x9240048 [0000.826] I> skipped mmio_addr = 0x9241000 [0000.830] I> skipped mmio_addr = 0x9241008 [0000.833] I> skipped mmio_addr = 0x9241010 [0000.837] I> skipped mmio_addr = 0x9241018 [0000.841] I> skipped mmio_addr = 0x9241020 [0000.845] I> skipped mmio_addr = 0x9241028 [0000.849] I> skipped mmio_addr = 0x9241030 [0000.853] I> skipped mmio_addr = 0x9241038 [0000.857] I> skipped mmio_addr = 0x9241040 [0000.861] I> skipped mmio_addr = 0x9242000 [0000.865] I> skipped mmio_addr = 0x9242008 [0000.869] I> Task: Prod config init [0000.872] I> Task: Pad voltage init [0000.876] I> Task: Prod init [0000.878] I> Task: Program rst req config reg [0000.883] I> Task: Common rail init [0000.886] I> DONE: Thermal config [0000.890] W> DEVICE_PROD: module = 13, instance = 4 not found in device prod. [0000.898] I> DONE: SOC rail config [0000.902] W> PMIC_CONFIG: Rail: MEMIO rail config not found in MB1 BCT. [0000.908] I> DONE: MEMIO rail config [0000.912] W> PMIC_CONFIG: Rail: GPU rail info not found in MB1 BCT. [0000.918] I> DONE: GPU rail info [0000.922] W> PMIC_CONFIG: Rail: CV rail info not found in MB1 BCT. [0000.928] I> DONE: CV rail info [0000.931] I> Task: Mem clock src [0000.934] I> Task: Misc. board config [0000.938] I> PMIC_CONFIG: Platform config not found in MB1 BCT. [0000.943] I> Task: SDRAM init [0000.946] I> MemoryType: 4 MemBctRevision: 1 [0000.953] I> MSS CAR: PLLM/HUB programming for MemoryType: 4 and MemBctRevision: 1 [0000.960] I> MSS CAR: Init PLLM [0000.963] I> MSS CAR: Init PLLHUB [0000.968] I> Encryption: MTS: en, TX: en, VPR: en, GSC: en [0000.979] I> SDRAM initialized! [0000.982] I> SDRAM Size in Total 0x200000000 [0000.987] I> Task: Dram Ecc scrub [0000.990] I> Task: DRAM alias check [0000.996] I> Task: Program NSDRAM carveout [0001.000] I> NSDRAM carveout encryption is enabled [0001.005] I> Program NSDRAM carveout [0001.008] I> Task: Register checker [0001.012] I> Task: Enable clock-mon [0001.016] I> FMON: Fmon re-programming done [0001.020] I> Task: Mapper init [0001.023] I> Task: SC7 Context Init [0001.026] I> Task: CCPLEX IST init [0001.029] I> Task: CPU WP0 [0001.032] I> Loading MCE [0001.035] I> Slot: 0 [0001.037] I> Binary[8] block-22784 (partition size: 0x80000) [0001.042] I> Binary name: MCE [0001.045] I> Size of crypto header is 8192 [0001.049] I> Size of crypto header is 8192 [0001.053] I> strt_pg_num(22784) num_of_pgs(16) read_buf(0x4003e000) [0001.059] I> BCH of MCE read from storage [0001.063] I> BCH address is : 0x4003e000 [0001.067] I> MCE header integrity check is success [0001.071] I> Binary magic in BCH component 0 is MTSM [0001.076] I> component binary type is 8 [0001.080] I> Size of crypto header is 8192 [0001.084] I> strt_pg_num(22800) num_of_pgs(350) read_buf(0x40000000) [0001.092] I> MCE binary is read from storage [0001.097] I> MCE binary integrity check is success [0001.101] I> Binary MCE loaded successfully at 0x40000000 (0x2baf0) [0001.107] I> Size of crypto header is 8192 [0001.118] I> Size of crypto header is 8192 [0001.122] I> Sending WP0 mailbox command to PSC [0001.131] I> Task: XUSB Powergate [0001.135] I> Skipping powergate XUSB. [0001.138] I> Task: MB1 fixed firewalls [0001.144] W> Firewall readback mismatch [0001.149] I> Task: Load bpmp-fw [0001.152] I> Slot: 0 [0001.154] I> Binary[15] block-9984 (partition size: 0x180000) [0001.160] I> Binary name: BPMP_FW [0001.163] I> Size of crypto header is 8192 [0001.167] I> Size of crypto header is 8192 [0001.171] I> strt_pg_num(9984) num_of_pgs(16) read_buf(0x807fe000) [0001.177] I> BCH of BPMP_FW read from storage [0001.181] I> BCH address is : 0x807fe000 [0001.185] I> BPMP_FW header integrity check is success [0001.190] I> Binary magic in BCH component 0 is BPMF [0001.195] I> component binary type is 15 [0001.199] I> Size of crypto header is 8192 [0001.203] I> strt_pg_num(10000) num_of_pgs(1990) read_buf(0x80000000) [0001.220] I> BPMP_FW binary is read from storage [0001.227] I> BPMP_FW binary integrity check is success [0001.232] I> Binary BPMP_FW loaded successfully at 0x80000000 (0xf8bc0) [0001.238] I> Slot: 0 [0001.240] I> Binary[16] block-13056 (partition size: 0x400000) [0001.246] I> Binary name: BPMP_FW_DTB [0001.249] I> Size of crypto header is 8192 [0001.253] I> Size of crypto header is 8192 [0001.257] I> strt_pg_num(13056) num_of_pgs(16) read_buf(0x807fc000) [0001.263] I> BCH of BPMP_FW_DTB read from storage [0001.268] I> BCH address is : 0x807fc000 [0001.272] I> BPMP_FW_DTB header integrity check is success [0001.277] I> Binary magic in BCH component 0 is BPMD [0001.282] I> component binary type is 16 [0001.286] I> Size of crypto header is 8192 [0001.290] I> strt_pg_num(13072) num_of_pgs(500) read_buf(0x807bd7f0) [0001.299] I> BPMP_FW_DTB binary is read from storage [0001.304] I> BPMP_FW_DTB binary integrity check is success [0001.309] I> Binary BPMP_FW_DTB loaded successfully at 0x807bd7f0 (0x3e800) [0001.316] I> Task: BPMP fw ast config [0001.320] I> Task: Load psc-fw [0001.323] I> Slot: 0 [0001.325] I> Binary[17] block-21248 (partition size: 0xc0000) [0001.330] I> Binary name: PSC_FW [0001.333] I> Size of crypto header is 8192 [0001.337] I> Size of crypto header is 8192 [0001.341] I> strt_pg_num(21248) num_of_pgs(16) read_buf(0x80ffe000) [0001.347] I> BCH of PSC_FW read from storage [0001.352] I> BCH address is : 0x80ffe000 [0001.355] I> PSC_FW header integrity check is success [0001.360] I> Binary magic in BCH component 0 is PFWP [0001.365] I> component binary type is 17 [0001.369] I> Size of crypto header is 8192 [0001.373] I> strt_pg_num(21264) num_of_pgs(591) read_buf(0x80fb4200) [0001.382] I> PSC_FW binary is read from storage [0001.387] I> PSC_FW binary integrity check is success [0001.392] I> Binary PSC_FW loaded successfully at 0x80fb4200 (0x49df0) [0001.399] I> Task: Load nvdec-fw [0001.402] I> Slot: 0 [0001.404] I> Binary[7] block-6400 (partition size: 0x100000) [0001.409] I> Binary name: NVDEC [0001.412] I> Size of crypto header is 8192 [0001.416] I> Size of crypto header is 8192 [0001.420] I> strt_pg_num(6400) num_of_pgs(16) read_buf(0x800fe000) [0001.426] I> BCH of NVDEC read from storage [0001.430] I> BCH address is : 0x800fe000 [0001.434] I> NVDEC header integrity check is success [0001.439] I> Binary magic in BCH component 0 is NDEC [0001.444] I> component binary type is 7 [0001.447] I> Size of crypto header is 8192 [0001.451] I> strt_pg_num(6416) num_of_pgs(560) read_buf(0x80000000) [0001.461] I> NVDEC binary is read from storage [0001.466] I> NVDEC binary integrity check is success [0001.470] I> Binary NVDEC loaded successfully at 0x80000000 (0x46000) [0001.477] I> Size of crypto header is 8192 [0001.488] I> Task: Load tsec-fw [0001.491] I> TSEC-FW load support not enabled [0001.495] I> Task: GPIO interrupt map [0001.499] I> Task: SC7 context save [0001.502] I> Slot: 0 [0001.504] I> Binary[27] block-0 (partition size: 0x100000) [0001.510] I> Binary name: BR_BCT [0001.513] I> Size of crypto header is 8192 [0001.517] I> Size of crypto header is 8192 [0001.520] I> Size of crypto header is 8192 [0001.524] I> strt_pg_num(0) num_of_pgs(16) read_buf(0xa0000000) [0001.530] I> BR_BCT binary is read from storage [0001.535] I> BR_BCT binary integrity check is success [0001.540] I> Binary BR_BCT loaded successfully at 0xa0000000 (0x2000) [0001.546] I> Slot: 0 [0001.548] I> Binary[13] block-23808 (partition size: 0x30000) [0001.554] I> Binary name: SC7-FW [0001.557] I> Size of crypto header is 8192 [0001.561] I> Size of crypto header is 8192 [0001.565] I> Size of crypto header is 8192 [0001.568] I> Size of crypto header is 8192 [0001.572] I> strt_pg_num(23808) num_of_pgs(16) read_buf(0xa0002000) [0001.579] I> BCH of SC7-FW read from storage [0001.583] I> BCH address is : 0xa0002000 [0001.587] I> SC7-FW header integrity check is success [0001.591] I> Binary magic in BCH component 0 is WB0B [0001.596] I> component binary type is 13 [0001.600] I> Size of crypto header is 8192 [0001.604] I> strt_pg_num(23824) num_of_pgs(349) read_buf(0xa0004000) [0001.612] I> SC7-FW binary is read from storage [0001.617] I> SC7-FW binary integrity check is success [0001.622] I> Binary SC7-FW loaded successfully at 0xa0004000 (0x2ba00) [0001.628] I> Slot: 0 [0001.630] I> Binary[22] block-24192 (partition size: 0x30000) [0001.636] I> Binary name: PSC_RF [0001.639] I> Size of crypto header is 8192 [0001.643] I> Size of crypto header is 8192 [0001.647] I> Size of crypto header is 8192 [0001.651] I> Size of crypto header is 8192 [0001.655] I> strt_pg_num(24192) num_of_pgs(16) read_buf(0xa002fa00) [0001.661] I> BCH of PSC_RF read from storage [0001.665] I> BCH address is : 0xa002fa00 [0001.669] I> PSC_RF header integrity check is success [0001.674] I> Binary magic in BCH component 0 is PSCR [0001.678] I> component binary type is 22 [0001.682] I> Size of crypto header is 8192 [0001.686] I> strt_pg_num(24208) num_of_pgs(224) read_buf(0xa0031a00) [0001.694] I> PSC_RF binary is read from storage [0001.698] I> PSC_RF binary integrity check is success [0001.703] I> Binary PSC_RF loaded successfully at 0xa0031a00 (0x1be60) [0001.713] I> Task: Save WP0 payload to SC7 ctx [0001.717] I> Task: Load MB2rf binary to SC7 ctx [0001.721] I> Slot: 0 [0001.723] I> Binary[14] block-24576 (partition size: 0x20000) [0001.729] I> Binary name: MB2_RF [0001.732] I> Size of crypto header is 8192 [0001.736] I> Size of crypto header is 8192 [0001.740] I> Size of crypto header is 8192 [0001.744] I> Size of crypto header is 8192 [0001.748] I> strt_pg_num(24576) num_of_pgs(16) read_buf(0xa00d5d10) [0001.754] I> BCH of MB2_RF read from storage [0001.758] I> BCH address is : 0xa00d5d10 [0001.762] I> MB2_RF header integrity check is success [0001.767] I> Binary magic in BCH component 0 is MB2R [0001.772] I> component binary type is 14 [0001.775] I> Size of crypto header is 8192 [0001.779] I> strt_pg_num(24592) num_of_pgs(224) read_buf(0xa00d7d10) [0001.787] I> MB2_RF binary is read from storage [0001.791] I> MB2_RF binary integrity check is success [0001.796] I> Binary MB2_RF loaded successfully at 0xa00d7d10 (0x1bf60) [0001.803] I> Task: Save fuse alias data to SC7 ctx [0001.807] I> Task: Save PMIC data to SC7 ctx [0001.811] I> Task: Save Pinmux data to SC7 ctx [0001.816] I> Task: Save Pad Voltage data to SC7 ctx [0001.820] I> Task: Save controller prod data to SC7 ctx [0001.826] I> Task: Save prod cfg data to SC7 ctx [0001.830] I> Task: Save I2C bus freq data to SC7 ctx [0001.835] I> Task: Save SOCTherm data to SC7 ctx [0001.839] I> Task: Save FMON data to SC7 ctx [0001.843] I> Task: Save VMON data to SC7 ctx [0001.847] I> Task: Save TZDRAM data to SC7 ctx [0001.852] I> Task: Save GPIO int data to SC7 ctx [0001.856] I> Task: Save clock data to SC7 ctx [0001.860] I> Task: Save debug data to SC7 ctx [0001.865] I> Task: Save MBWT data to SC7 ctx [0001.873] I> SC7 context save done [0001.876] I> Task: Load MB2/Applet/FSKP [0001.880] I> Loading MB2 [0001.882] I> Slot: 0 [0001.884] I> Binary[6] block-8448 (partition size: 0x80000) [0001.889] I> Binary name: MB2 [0001.892] I> Size of crypto header is 8192 [0001.896] I> Size of crypto header is 8192 [0001.900] I> strt_pg_num(8448) num_of_pgs(16) read_buf(0x8007e000) [0001.906] I> BCH of MB2 read from storage [0001.910] I> BCH address is : 0x8007e000 [0001.914] I> MB2 header integrity check is success [0001.919] I> Binary magic in BCH component 0 is MB2B [0001.923] I> component binary type is 6 [0001.927] I> Size of crypto header is 8192 [0001.931] I> strt_pg_num(8464) num_of_pgs(846) read_buf(0x80000000) [0001.942] I> MB2 binary is read from storage [0001.947] I> MB2 binary integrity check is success [0001.952] I> Binary MB2 loaded successfully at 0x80000000 (0x69a70) [0001.958] I> Task: Map CCPLEX SHARED carveout [0001.962] I> Task: Prepare MB2 params [0001.966] I> Task: Dram ecc test [0001.969] I> Task: Misc NV security settings [0001.973] I> NVDEC sticky bits programming done [0001.977] I> Successfully powergated NVDEC [0001.981] I> Task: Disable/Reload WDT [0001.985] I> Task: Program misc carveouts [0001.989] I> Program IPC carveouts [0001.992] I> Task: Disable SCPM/POD reset [0001.996] I> SLCG Global override status := 0x0 [0002.000] I> MB1: MSS reconfig completed I> MB2 (version: 0.0.0.0-t234-54845784-22833a33) I> t234-A01-1-Silicon (0x12347) I> Boot-mode : Coldboot I> Emulation: I> Entry timestamp: 0x001ef686 I> Regular heap: [base:0x40040000, size:0x10000] I> DMA heap: [base:0x273800000, size:0x800000] I> Task: SE error check I> Task: Crypto init I> Task: MB2 Params integrity check I> Task: Enable CCPLEX WDT 5th expiry I> Task: ARI update carveout TZDRAM I> Task: Configure OEM set LA/PTSA values I> Task: Check MC errors I> Task: SMMU external bypass disable I> Task: Enable hot-plug capability I> Task: TZDRAM heap init I> Task: PSC mailbox init I> Task: Enable clock for external modules I> Task: Measured Boot init I> Task: fTPM silicon identity init I> fTPM is not enabled. I> Task: OEM SC7 context save init I> Task: I2C register I> Task: Map CCPLEX_INTERWORLD_SHMEM carveout I> Task: Program CBB PCIE AMAP regions I> Task: Boot device init I> Boot_device: QSPI_FLASH instance: 0 I> Qspi clock source : pllc_out0 I> QSPI Flash: Macronix 64MB I> QSPI-0l initialized successfully I> Secondary storage device: QSPI_FLASH instance: 0 I> Task: Partition Manager Init I> strt_pg_num(1) num_of_pgs(1) read_buf(0x273801000) I> strt_pg_num(131071) num_of_pgs(1) read_buf(0x273801000) I> strt_pg_num(131039) num_of_pgs(32) read_buf(0x273801200) I> Found 60 partitions in QSPI_FLASH (instance 0) I> Task: Pass DRAM ECC PRL Flag to FSI I> Task: Load and authenticate registered FWs I> Task: Load AUXP FWs I> Successfully register SPE FW load task with MB2 loader I> Successfully register RCE FW load task with MB2 loader I> Successfully register DCE FW load task with MB2 loader I> Unpowergating APE I> Unpowergate done I> Successfully register APE FW load task with MB2 loader I> Skipping FSI FW load I> Successfully register XUSB FW load task with MB2 loader I> Successfully register PVA FW load task with MB2 loader I> Partition name: A_spe-fw I> Size of partition: 589824 I> Binary@ device:3/0 block-55040 (partition size: 0x90000), name: A_spe-fw I> strt_pg_num(55040) num_of_pgs(16) read_buf(0x40067a30) I> strt_pg_num(55056) num_of_pgs(512) read_buf(0x272e00000) I> Partition name: A_rce-fw I> Size of partition: 1048576 I> Binary@ device:3/0 block-56192 (partition size: 0x100000), name: A_rce-fw I> strt_pg_num(56192) num_of_pgs(16) read_buf(0x40067a30) I> strt_pg_num(56208) num_of_pgs(880) read_buf(0x272a00000) I> spe: Authentication Finalize Done I> Binary spe loaded successfully at 0x272e00000 I> Partition name: A_dce-fw I> Size of partition: 5242880 I> Binary@ device:3/0 block-44800 (partition size: 0x500000), name: A_dce-fw I> strt_pg_num(44800) num_of_pgs(16) read_buf(0x40067a30) I> rce: Authentication Finalize Done I> Binary rce loaded successfully at 0x272a00000 I> Successfully register RCE FW context save task with MB2 loader I> dce : oem authentication of header done I> strt_pg_num(44816) num_of_pgs(1) read_buf(0x2739400d8) I> strt_pg_num(44816) num_of_pgs(8) read_buf(0x2739400d8) I> dce : meta-blob integrity check is success. I> strt_pg_num(44824) num_of_pgs(512) read_buf(0x2738000c0) I> strt_pg_num(45336) num_of_pgs(512) read_buf(0x2738400c0) I> dce : will be decompressed at 0x27a000000 I> version 1 Bin 1 BCheckSum 0 content_size 0 Content ChkSum 1 reserved_00 0 I> Reserved10 0 BlockMaxSize 5 Reserved11 0 I> strt_pg_num(45848) num_of_pgs(512) read_buf(0x2738800c0) I> dce : decompressed to 12083328 bytes I> dce: plain binary integrity check is success I> Partition name: A_adsp-fw I> Size of partition: 2097152 I> Binary@ device:3/0 block-58240 (partition size: 0x200000), name: A_adsp-fw I> strt_pg_num(58240) num_of_pgs(16) read_buf(0x40067a30) I> strt_pg_num(58256) num_of_pgs(800) read_buf(0x27d800000) I> dce: Authentication Finalize Done I> Binary dce loaded successfully at 0x27a000000 I> Partition name: A_xusb-fw I> Size of partition: 262144 I> Binary@ device:3/0 block-9472 (partition size: 0x40000), name: A_xusb-fw I> strt_pg_num(9472) num_of_pgs(16) read_buf(0x40067a30) I> strt_pg_num(9488) num_of_pgs(312) read_buf(0x272f00000) I> ape: Authentication Finalize Done I> Binary ape loaded successfully at 0x27d800000 I> Successfully register APE FW context save task with MB2 loader I> Partition name: A_pva-fw I> Size of partition: 262144 I> Binary@ device:3/0 block-62336 (partition size: 0x40000), name: A_pva-fw I> strt_pg_num(62336) num_of_pgs(16) read_buf(0x40067a30) I> xusb: Authentication Finalize Done I> Binary xusb loaded successfully at 0x272f00000 I> Successfully register XUSB FW context save task with MB2 loader I> pva-fw : oem authentication of header done I> strt_pg_num(62352) num_of_pgs(1) read_buf(0x2739400d8) I> strt_pg_num(62352) num_of_pgs(8) read_buf(0x2739400d8) I> pva-fw : meta-blob integrity check is success. I> strt_pg_num(62360) num_of_pgs(512) read_buf(0x2738000c0) I> pva-fw : will be decompressed at 0x273180000 I> version 1 Bin 1 BCheckSum 0 content_size 0 Content ChkSum 1 reserved_00 0 I> Reserved10 0 BlockMaxSize 5 Reserved11 0 I> pva-fw : decompressed to 2156512 bytes I> pva-fw: plain binary integrity check is success I> pva-fw: Authentication Finalize Done I> Binary pva-fw loaded successfully at 0x273180000 I> Successfully register PVA FW context save task with MB2 loader I> Task: Check MC errors I> Task: Carveout setup I> Program remaining OEM carveouts I> Task: Enable FSITHERM I> Task: Enable FSI VMON I> Task: Validate FSI Therm readings I> Task: Restore XUSB sec I> Task: Enable FSI SE clock I> Task: Initialize SBSA UART CAR I> Task: Initialize CPUBL Params I> CPUBL-params @ 0x276000000 I> Task: Ratchet update W> Skip ratchet update - OPTIN fuse not set I> Task: Prepare eeprom data I> Task: Revoke PKC fuse I> PKC revoke fuse burn not requested I> Task: FSI padctl context save W> Skipping FSI padctl config save: fsi not enabled I> Task: Unpowergate APE W> mb2_unpowergate_ape: skip! APE is in unpowergated state I> Task: Memctrl reconfig pending clients I> Task: OEM firewalls I> OEM firewalls configured I> Task: Powergate APE I> Powergating APE I> Powergate done I> Task: OEM firewall restore saved settings I> Task: Unhalt AUXPs I> Unhalting SPE.. I> Enabling combined UART ????spe: early_init ????vic initialized ????tsc initialized ????aon lic initialized ????spe: tag is 5243985d1b1eb3f06fac6d36bd7e74ac ????spe: SafeRTOS v8.4 ????spe: init ????scheduler initialized ????aon hsp initialized ????tag initialized ????tcu initialized ????bpmp ipc initialized ????spe: late init ????cpu_nic clock initialized ????apb clock initialized ????pm initialized ????bpmp hsp initialized ????top1 hsp initialized ????ccplex ipc initialized ????spe: start scheduler ???? I> Task: Trigger mailbox for PSC-BL1 exit I> Sending opcode 0x4d420802 to psc I> Received ACK from psc I> Task: Start secure NOR provision I> Skip Secure NOR provisioning I> Task: Trigger load FSI keyblob I> Task: Complete load FSI keyblob I> Task: MB2-PSC_FW Key Manager Init I> Sending opcode OP_PSC_KEY_MANAGER to psc-fw I> Sending opcode 0x4b45594d to psc ?? hwwdt_init: WDT boot cfg 0x710010 sts 0x10 bpmp: socket 0 bpmp: base binary md5 is da583751bbfe2b7f6e204562d97ff39e bpmp: combined binary md5 is e941463f35523d12ee540d9bc33bc02f bpmp: firmware tag is e941463f35523d12ee54-da583751bbf initialized vwdt initialized mail_early initialized fuse initialized vfrel initialized adc fmon_populate_monitors: found 199 monitors initialized fmon initialized mc initialized reset initialized uphy_early initialized emc_early initialized pm 465 clocks registered initialized clk_mach initialized clk_cal_early initialized clk_mach_early_config initialized io_dpd initialized soctherm initialized regime initialized i2c vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors initialized vrmon initialized regulator ??I> Received ACK from psc I> Task: Unhalt FSI I> FSI unhalt skipped I> Task: Unhalt AUXPs I> Unhalting RCE I> RCE unhalt successful I> Unhalting DCE I> DCE unhalt successful I> APE unhalt skipped I> Task: Load HV/CPUBL I> Task: Load TOS I> Task: Trigger load TS??[ 2.550877] Camera-FW on t234-rce-safe started ??EC ??TCU early console ena??initialized avfs_clk_platform initialized powergate ??bled. ??leyblob I> Sending opco??initialized dvs ??de 0x5??initialized clk_mach_config initialized suspend initialized strap initialized mce_dbell ??353?? ??5452 to psc I> Sent opcode to psc I> Task: Load and authenticate registered FWs I> Partition name: A_cpu-bootloader I> Size of partition: 3670016 ??DCE Started ??I> Binary@ device:3/0 block-24832 (partition size: 0x380000), name: A_cpu-bootloader I> strt_pg_num(24832) num_of_pgs(16) read_buf(0x40067a30) ??DCE_R5_Init ??I> cpubl : oem authentication of header done I> strt_pg_num(24848) num_of_pgs(1) read_buf(0x273943c98) I> str??initialized emc initialized emc_mrq ??t_pg_num(24848)??MPU enabled DCE??initialized clk_cal initialized uphy_dt initialized uphy_mrq HSIO UPHY reset has been de-asserted 0x0 initialized uphy initialized pg_late initialized pg_mrq_init swdtimer_init: reg polling start w period 47 ms initialized swdtimer initialized hwwdt_late initialized bwmgr initialized thermal_host_trip initialized thermal_mrq initialized oc_mrq initialized reset_mrq initialized mail_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized i2c_mrq initialized tag_mrq initialized bwmgr_mrq initialized console_mrq missing prod DT calibration data for 199 fmons initialized clk_sync_fmon_post ??_SW_Init ?? num_of_pgs(8) ??initialized clk_cal_late initialized noc_late initialized cvc ??read_buf(0x273943c98) I> cpubl ??initialized avfs_clk_mach_post initialized avfs_clk_platform_post initialized cvc_late WARNING @ [platform/drivers/rm/rm.c]: shared rails 0/2 have not matching zones 0/1 WARNING @ [platform/drivers/rm/rm.c]: shared rails 0/3 have not matching zone list sizes 1/3 WARNING @ [platform/drivers/rm/rm.c]: shared rails 0/3 have not matching zones 0/2 WARNING @ [platform/drivers/rm/rm.c]: shared rails 2/0 have not matching zones 1/0 WARNING @ [platform/drivers/rm/rm.c]: shared rails 2/3 have not matching zone list sizes 1/3 WARNING @ [platform/drivers/rm/rm.c]: shared rails 2/3 have not matching zones 1/2 WARNING @ [platform/drivers/rm/rm.c]: shared rails 3/0 have not matching zone list sizes 3/1 WARNING @ [platform/drivers/rm/rm.c]: shared rails 3/0 have not matching zones 2/0 WARNING @ [platform/drivers/rm/rm.c]: shared rails 3/2 have not matching zone list sizes 3/1 WARNING @ [platform/drivers/rm/rm.c]: shared rails 3/2 have not matching zones 2/1 initialized rm initialized console_late handling unreferenced clks enable can1_core enable can1_host enable can2_core enable can2_host enable pwm3 enable sdmmc4_axicif enable mss_encrypt enable maud enable pllg_ref enable dsi_core enable aza_2xbit enable xusb_ss enable xusb_fs enable xusb_falcon enable xusb_core_mux enable dsi_lp clk_check_max_rate: pex1_c6_core rate 500000000 > max 250000000 clk_check_max_rate: pex2_c7_core rate 500000000 > max 250000000 clk_check_max_rate: pex2_c8_core rate 500000000 > max 250000000 clk_check_max_rate: pex2_c9_core rate 500000000 > max 250000000 clk_check_max_rate: pex2_c10_core rate 500000000 > max 250000000 clk_check_max_rate: pex0_c0_core rate 500??[ 2.836133] Camera-FW on t234-rce-safe ready SHA1=e2238c99 (crt 12.421 ms,??000000 > max 250000000 clk_check_max_rate: pex0_c1_cor?? total boot 298.750 m??e rate 500000000 > max 250000000 clk_check_max_rate: pex0_c2_core rate 500000??s) ??000 > max 250000000 clk_check_max_rate: pex0_c3_core rate 500000000 > max 250000000 clk_check_max_rate: pex0_c4_core rate 500000000 > max 250000000 clk_check_max_rate: pex1_c5_core rate 500000000 > max 250000000 initialized clk_mach_post initialized pg_post initialized regulator_post initialized profile initialized mrq initialized patrol_scrubber initialized cactmon initialized extras_post bpmp: init complete ??: meta-blob integrity??Admin Task Init Admin Task Init complete Print Task Init RM Task Init SHA Task Init Admin Task S?? check is success. I> strt_pg_num(24856) num_of_pgs(512) read_buf(0x273803c80) ??tarted DCE SC7 SHA Enabled RM Task Started RM Tas??I> strt_pg_num(25368)??k Running Print Task Started Print Task Running SHA Task Started SHA Task ?? num_of_pgs(512) read_buf(0x273843c80) ??Running DCE: FW Boot Complete Admin Task Running ??I> cpubl : will be decompressed at 0x272000000 I> version 1 Bin 1 BCheckSum 0 content_size 0 Content ChkSum 1 reserved_00 0 I> Reserved10 0 BlockMaxSize 5 Reserved11 0 I> strt_pg_num(25880) num_of_pgs(512) read_buf(0x273883c80) I> strt_pg_num(26392) num_of_pgs(512) read_buf(0x2738c3c80) I> strt_pg_num(26904) num_of_pgs(512) read_buf(0x273903c80) I> strt_pg_num(27416) num_of_pgs(512) read_buf(0x273803c80) I> strt_pg_num(27928) num_of_pgs(512) read_buf(0x273843c80) I> strt_pg_num(28440) num_of_pgs(512) read_buf(0x273883c80) I> strt_pg_num(28952) num_of_pgs(512) read_buf(0x2738c3c80) I> strt_pg_num(29464) num_of_pgs(512) read_buf(0x273903c80) I> strt_pg_num(29976) num_of_pgs(512) read_buf(0x273803c80) I> strt_pg_num(30488) num_of_pgs(512) read_buf(0x273843c80) I> strt_pg_num(31000) num_of_pgs(512) read_buf(0x273883c80) I> cpubl : decompressed to 3547264 bytes I> cpubl: plain binary integrity check is success I> Partition name: A_secure-os I> Size of partition: 4194304 I> Binary@ device:3/0 block-32000 (partition size: 0x400000), name: A_secure-os I> strt_pg_num(32000) num_of_pgs(16) read_buf(0x40067a30) I> strt_pg_num(32016) num_of_pgs(3672) read_buf(0xc1d35000) I> MB2-params @ 0x40060000 I> NSDRAM carveout base: 0x80000000, size: 0x1f25f0000 I> cpubl_params: nsdram: carveout: 1, encryption: 1 I> cpubl: Authentication Finalize Done I> Binary cpubl loaded successfully at 0x272000000 I> tos: Authentication Finalize Done I> Binary tos loaded successfully at 0xc1d35000 I> Relocating OP-TEE dtb from: 0xc1eff180 to 0xbe040020, size: 0x2754 I> [0] START: 0x80000000, SIZE: 0x1f25f0000 I> [1] START: 0x276000000, SIZE: 0x2000000 I> Setting NS memory ranges to OP-TEE dtb finished. I> Partition name: A_eks I> Size of partition: 262144 I> Binary@ device:3/0 block-44288 (partition size: 0x40000), name: A_eks I> strt_pg_num(44288) num_of_pgs(16) read_buf(0x40067a30) I> strt_pg_num(44304) num_of_pgs(8) read_buf(0xbe020000) I> eks: Authentication Finalize Done I> Binary eks loaded successfully at 0xbe020000 I> EKB detected (length: 0x410) @ VA:0xbe020000 I> Task: Add cpubl params integrity check I> Added cpubl params digest. I> Task: Prepare TOS params I> Setting EKB blob info to OPTEE dtb finished. I> Setting OPTEE arg3: 0xbe040020 I> NVRNG: Health check success I> NVRNG: Health check success I> Task: OEM SC7 context save I> OEM sc7 context saved I> Task: Disable MSS perf stats I> Task: Program display sticky bits I> Task: Storage device deinit I> Task: SMMU init I> Task: Program GICv3 registers I> Task: Audit firewall settings I> Task: Bootchain failure check I> Current Boot-Chain Slot: 0 I> BR-BCT Boot-Chain is 0, and status is 1. Set UPDATE_BRBCT bit to 0 I> Task: Burn RESERVED_ODM0 fuse I> Task: Lock fusing I> Task: Clear dec source key I> MB2 finished ??NOTICE: BL31: v2.8(release):e12e3fa93 NOTICE: BL31: Built : 17:14:28, Jan 7 2025 I/TC: I/TC: Non-secure external DT found I/TC: OP-TEE version: 4.2 (gcc version 11.3.0 (Buildroot 2022.08)) #2 Wed Jan 8 01:24:03 UTC 2025 aarch64 I/TC: WARNING: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Test OEM keys are being used. This is insecure for shipping products! I/TC: fTPM ID is not enabled. I/TC: ftpm-helper PTA: fTPM DT or EKB is not available. fTPM provisioning is not supported. I/TC: Primary CPU switching to normal world boot ?? Jetson UEFI firmware (version 36.4.3-gcid-38968081 built on 2025-01-08T01:18:20+00:00) ??I/TC: Reserved shared memory is disabled I/TC: Dynamic shared memory is enabled I/TC: Normal World virtualization support is disabled I/TC: Asynchronous notifications are disabled I/TC: WARNING: Test UEFI variable auth key is being used ! I/TC: WARNING: UEFI variable protection is not fully enabled ! ?? ??[ 5.927662] Camera-FW on t234-rce-safe started TCU early console enabled. ?? ??[ 6.030451] Camera-FW on t234-rce-safe ready SHA1=e2238c99 (crt 1.401 ms, total boot 104.297 ms) ?? Jetson System firmware version 36.4.3-gcid-38968081 date 2025-01-08T01:18:20+00: 00 ESC to enter Setup. F11 to enter Boot Manager Menu. Enter to continue boot. ......L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services... ??debugfs initialized ??I/TC: Reserved shared memory is disabled I/TC: Dynamic shared memory is enabled I/TC: Normal World virtualization support is disabled I/TC: Asynchronous notifications are disabled ??[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd421] [ 0.000000] Linux version 5.15.148-tegra (jetson@jetson-virtual-machine) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2022.08) 11.3.0, GNU ld (GNU Binutils) 2.38) #44 SMP PREEMPT Thu May 22 23:10:31 CST 2025 () [ 0.000000] Machine model: NVIDIA Jetson Orin Nano Engineering Reference Developer Kit Super [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x26d82f198 TPMFinalLog=0x25e3f0000 SMBIOS=0xffff0000 SMBIOS 3.0=0x26d220000 MEMATTR=0x2676b7018 ESRT=0x2676eb798 TPMEventLog=0x25e408018 RNG=0x25a9b0018 MEMRESERVE=0x25e40ac18 [ 0.000000] random: crng init done [ 0.000000] secureboot: Secure boot disabled [ 0.000000] esrt: Reserving ESRT space from 0x00000002676eb798 to 0x00000002676eb7d0. [ 0.000000] Reserved memory: created CMA memory pool at 0x000000024a000000, size 256 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] NUMA: No NUMA configuration found [ 0.000000] NUMA: Faking a node at [mem 0x0000000080000000-0x0000000277ffffff] [ 0.000000] NUMA: NODE_DATA [mem 0x271303800-0x271305fff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x0000000277ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000bdffffff] [ 0.000000] node 0: [mem 0x00000000c2000000-0x00000000fffdffff] [ 0.000000] node 0: [mem 0x00000000fffe0000-0x00000000ffffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000025e22ffff] [ 0.000000] node 0: [mem 0x000000025e230000-0x000000025e3fffff] [ 0.000000] node 0: [mem 0x000000025e400000-0x000000025e40afff] [ 0.000000] node 0: [mem 0x000000025e40b000-0x000000025e40bfff] [ 0.000000] node 0: [mem 0x000000025e40c000-0x000000026b8effff] [ 0.000000] node 0: [mem 0x000000026b8f0000-0x000000026d82ffff] [ 0.000000] node 0: [mem 0x000000026d830000-0x0000000271dfffff] [ 0.000000] node 0: [mem 0x0000000271e00000-0x0000000271ffffff] [ 0.000000] node 0: [mem 0x0000000272000000-0x000000027259ffff] [ 0.000000] node 0: [mem 0x0000000272f00000-0x0000000272ffffff] [ 0.000000] node 0: [mem 0x0000000276000000-0x0000000277ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x0000000277ffffff] [ 0.000000] On node 0, zone DMA: 16384 pages in unavailable ranges [ 0.000000] On node 0, zone Normal: 2400 pages in unavailable ranges [ 0.000000] On node 0, zone Normal: 12288 pages in unavailable ranges [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 29 pages/cpu s80408 r8192 d30184 u118784 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Address authentication (architected algorithm) [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: detected: Hardware dirty bit management [ 0.000000] CPU features: detected: Spectre-v4 [ 0.000000] CPU features: detected: Spectre-BHB [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2001056 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=PARTUUID=9cad00e5-e503-4735-baac-612c71067a5a rw rootwait rootfstype=ext4 mminit_loglevel=4 console=ttyTCU0,115200 firmware_class.path=/etc/firmware fbcon=map:0 nospectre_bhb video=efifb:off console=tty0 bl_prof_dataptr=2031616@0x271E10000 bl_prof_ro_ptr=65536@0x271E00000 [ 0.000000] Unknown kernel command line parameters "bl_prof_dataptr=2031616@0x271E10000 bl_prof_ro_ptr=65536@0x271E00000", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000fbfe0000-0x00000000fffe0000] (64MB) [ 0.000000] Memory: 7517944K/8133248K available (19584K kernel code, 4070K rwdata, 10120K rodata, 7680K init, 537K bss, 353160K reserved, 262144K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: 960 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] GICv3: Distributor has no Range Selector support [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GICv3: 16 PPIs implemented [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000000f440000 [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000001] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000359] Console: colour dummy device 80x25 [ 0.000369] printk: console [tty0] enabled [ 0.000429] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.000438] pid_max: default: 32768 minimum: 301 [ 0.000476] LSM: Security Framework initializing [ 0.000499] Yama: becoming mindful. [ 0.000516] SELinux: Initializing. [ 0.000592] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.000607] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.001699] rcu: Hierarchical SRCU implementation. [ 0.003815] Tegra Revision: A01 SKU: 213 CPU Process: 0 SoC Process: 0 [ 0.004125] Remapping and enabling EFI services. [ 0.004928] smp: Bringing up secondary CPUs ... [ 0.005424] Detected PIPT I-cache on CPU1 [ 0.005469] GICv3: CPU1: found redistributor 100 region 0:0x000000000f460000 [ 0.005501] CPU1: Booted secondary processor 0x0000000100 [0x410fd421] [ 0.005951] Detected PIPT I-cache on CPU2 [ 0.005963] GICv3: CPU2: found redistributor 200 region 0:0x000000000f480000 [ 0.005977] CPU2: Booted secondary processor 0x0000000200 [0x410fd421] [ 0.006385] Detected PIPT I-cache on CPU3 [ 0.006395] GICv3: CPU3: found redistributor 300 region 0:0x000000000f4a0000 [ 0.006408] CPU3: Booted secondary processor 0x0000000300 [0x410fd421] [ 0.008856] Detected PIPT I-cache on CPU4 [ 0.008883] GICv3: CPU4: found redistributor 10200 region 0:0x000000000f500000 [ 0.008912] CPU4: Booted secondary processor 0x0000010200 [0x410fd421] [ 0.009400] Detected PIPT I-cache on CPU5 [ 0.009412] GICv3: CPU5: found redistributor 10300 region 0:0x000000000f520000 [ 0.009427] CPU5: Booted secondary processor 0x0000010300 [0x410fd421] [ 0.009482] smp: Brought up 1 node, 6 CPUs [ 0.009488] SMP: Total of 6 processors activated. [ 0.009491] CPU features: detected: 32-bit EL0 Support [ 0.009492] CPU features: detected: Data cache clean to the PoU not required for I/D coherence [ 0.009494] CPU features: detected: Common not Private translations [ 0.009496] CPU features: detected: CRC32 instructions [ 0.009496] CPU features: detected: Data cache clean to Point of Persistence [ 0.009498] CPU features: detected: Generic authentication (architected algorithm) [ 0.009499] CPU features: detected: RCpc load-acquire (LDAPR) [ 0.009500] CPU features: detected: LSE atomic instructions [ 0.009501] CPU features: detected: Privileged Access Never [ 0.009502] CPU features: detected: RAS Extension Support [ 0.009505] CPU features: detected: Speculative Store Bypassing Safe (SSBS) [ 0.025162] spectre-bhb mitigation disabled by command line option [ 0.051723] CPU: All CPU(s) started at EL2 [ 0.055023] devtmpfs: initialized [ 0.074500] KASLR enabled [ 0.074736] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.074768] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.079804] pinctrl core: initialized pinctrl subsystem [ 0.080874] SMBIOS 3.6.0 present. [ 0.080888] DMI: NVIDIA NVIDIA Jetson Orin Nano Engineering Reference Developer Kit Super/Jetson, BIOS 36.4.3-gcid-38968081 01/08/2025 [ 0.081504] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.083355] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.083484] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.083573] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.083642] audit: initializing netlink subsys (disabled) [ 0.083770] audit: type=2000 audit(0.080:1): state=initialized audit_enabled=0 res=1 [ 0.085443] thermal_sys: Registered thermal governor 'step_wise' [ 0.085448] thermal_sys: Registered thermal governor 'user_space' [ 0.085448] thermal_sys: Registered thermal governor 'power_allocator' [ 0.089651] cpuidle: using governor menu [ 0.089885] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.089978] ASID allocator initialised with 32768 entries [ 0.092029] Serial: AMBA PL011 UART driver [ 0.103569] 31d0000.serial: ttyAMA0 at MMIO 0x31d0000 (irq = 117, base_baud = 0) is a SBSA [ 0.115448] platform bpmp: Fixing up cyclic dependency with 2c60000.external-memory-controller [ 0.125264] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.125271] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.125275] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.125278] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.126284] cryptd: max_cpu_qlen set to 1000 [ 0.128134] ACPI: Interpreter disabled. [ 0.129568] VDD_1V8_AO: supplied by VDD_5V0_SYS [ 0.129770] VDD_3V3_AO: supplied by VDD_5V0_SYS [ 0.130055] VDD_AV10_HUB: supplied by VDD_5V0_SYS [ 0.130523] iommu: Default domain type: Translated [ 0.130528] iommu: DMA domain TLB invalidation policy: strict mode [ 0.130895] SCSI subsystem initialized [ 0.131158] vgaarb: loaded [ 0.131326] usbcore: registered new interface driver usbfs [ 0.131350] usbcore: registered new interface driver hub [ 0.131365] usbcore: registered new device driver usb [ 0.131820] pps_core: LinuxPPS API ver. 1 registered [ 0.131825] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.131838] PTP clock support registered [ 0.131929] EDAC MC: Ver: 3.0.0 [ 0.133157] Registered efivars operations [ 0.133875] FPGA manager framework [ 0.133989] Advanced Linux Sound Architecture Driver Initialized. [ 0.134529] Bluetooth: Core ver 2.22 [ 0.134560] NET: Registered PF_BLUETOOTH protocol family [ 0.134564] Bluetooth: HCI device and connection manager initialized [ 0.134575] Bluetooth: HCI socket layer initialized [ 0.134579] Bluetooth: L2CAP socket layer initialized [ 0.134593] Bluetooth: SCO socket layer initialized [ 0.135090] clocksource: Switched to clocksource arch_sys_counter [ 0.170597] VFS: Disk quotas dquot_6.6.0 [ 0.170684] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.170930] pnp: PnP ACPI: disabled [ 0.174132] NET: Registered PF_INET protocol family [ 0.174442] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.175992] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.176087] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.176100] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.176200] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.177598] TCP: Hash tables configured (established 65536 bind 65536) [ 0.177799] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.177831] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.178066] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.178473] RPC: Registered named UNIX socket transport module. [ 0.178478] RPC: Registered udp transport module. [ 0.178479] RPC: Registered tcp transport module. [ 0.178481] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.178493] PCI: CLS 0 bytes, default 64 [ 0.178780] Unpacking initramfs... [ 0.192508] hw perfevents: enabled with armv8_cortex_a78 PMU driver, 7 counters available [ 0.192907] kvm [1]: IPA Size Limit: 48 bits [ 0.192946] kvm [1]: GICv3: no GICV resource entry [ 0.192955] kvm [1]: disabling GICv2 emulation [ 0.192977] kvm [1]: GIC system register CPU interface enabled [ 0.193045] kvm [1]: vgic interrupt IRQ9 [ 0.193195] kvm [1]: VHE mode initialized successfully [ 0.196447] Initialise system trusted keyrings [ 0.196493] Key type blacklist registered [ 0.196573] workingset: timestamp_bits=42 max_order=21 bucket_order=0 [ 0.200421] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.200894] NFS: Registering the id_resolver key type [ 0.200915] Key type id_resolver registered [ 0.200920] Key type id_legacy registered [ 0.200987] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.201003] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.201025] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.201214] 9p: Installing v9fs 9p2000 file system support [ 0.201865] integrity: Platform Keyring initialized [ 0.215210] Key type asymmetric registered [ 0.215217] Asymmetric key parser 'x509' registered [ 0.215294] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) [ 0.215300] io scheduler mq-deadline registered [ 0.215307] io scheduler kyber registered [ 0.228069] EINJ: ACPI disabled. [ 0.240208] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.241984] SuperH (H)SCI(F) driver initialized [ 0.242348] msm_serial: driver initialized [ 0.243023] printk: console [ttyTCU0] enabled [ 0.244009] arm-smmu 8000000.iommu: probing hardware configuration... [ 0.244015] arm-smmu 8000000.iommu: SMMUv2 with: [ 0.244021] arm-smmu 8000000.iommu: stage 1 translation [ 0.244026] arm-smmu 8000000.iommu: stage 2 translation [ 0.244029] arm-smmu 8000000.iommu: nested translation [ 0.244037] arm-smmu 8000000.iommu: stream matching with 128 register groups [ 0.244043] arm-smmu 8000000.iommu: 128 context banks (0 stage-2 only) [ 0.244058] arm-smmu 8000000.iommu: Supported page sizes: 0x61311000 [ 0.244062] arm-smmu 8000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 0.244064] arm-smmu 8000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 0.245059] arm-smmu 10000000.iommu: probing hardware configuration... [ 0.245063] arm-smmu 10000000.iommu: SMMUv2 with: [ 0.245065] arm-smmu 10000000.iommu: stage 1 translation [ 0.245066] arm-smmu 10000000.iommu: stage 2 translation [ 0.245067] arm-smmu 10000000.iommu: nested translation [ 0.245070] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 0.245072] arm-smmu 10000000.iommu: 128 context banks (0 stage-2 only) [ 0.245076] arm-smmu 10000000.iommu: Supported page sizes: 0x61311000 [ 0.245077] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 0.245080] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 0.245468] arm-smmu 12000000.iommu: probing hardware configuration... [ 0.245472] arm-smmu 12000000.iommu: SMMUv2 with: [ 0.245475] arm-smmu 12000000.iommu: stage 1 translation [ 0.245476] arm-smmu 12000000.iommu: stage 2 translation [ 0.245479] arm-smmu 12000000.iommu: nested translation [ 0.245481] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 0.245483] arm-smmu 12000000.iommu: 128 context banks (0 stage-2 only) [ 0.245504] arm-smmu 12000000.iommu: Supported page sizes: 0x61311000 [ 0.245505] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 0.245506] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 0.252932] loop: module loaded [ 0.253849] megasas: 07.717.02.00-rc1 [ 0.258177] tun: Universal TUN/TAP device driver, 1.6 [ 0.258780] thunder_xcv, ver 1.0 [ 0.258819] thunder_bgx, ver 1.0 [ 0.258840] nicpf, ver 1.0 [ 0.259738] hclge is initializing [ 0.259770] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 0.259779] hns3: Copyright (c) 2017 Huawei Corporation. [ 0.259818] e1000: Intel(R) PRO/1000 Network Driver [ 0.259824] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 0.259853] e1000e: Intel(R) PRO/1000 Network Driver [ 0.259859] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 0.259883] igb: Intel(R) Gigabit Ethernet Network Driver [ 0.259889] igb: Copyright (c) 2007-2014 Intel Corporation. [ 0.259910] igbvf: Intel(R) Gigabit Virtual Function Network Driver [ 0.259916] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 0.260123] sky2: driver version 1.30 [ 0.260839] VFIO - User Level meta-driver version: 0.3 [ 0.262490] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.262500] ehci-pci: EHCI PCI platform driver [ 0.262529] ehci-platform: EHCI generic platform driver [ 0.262621] ehci-orion: EHCI orion driver [ 0.262690] ehci-exynos: EHCI Exynos driver [ 0.262762] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.262786] ohci-pci: OHCI PCI platform driver [ 0.262814] ohci-platform: OHCI generic platform driver [ 0.262893] ohci-exynos: OHCI Exynos driver [ 0.263383] usbcore: registered new interface driver usb-storage [ 0.265318] i2c_dev: i2c /dev entries driver [ 0.266668] pps pps0: new PPS source ktimer [ 0.266680] pps pps0: ktimer PPS source registered [ 0.266690] pps_ldisc: PPS line discipline registered [ 0.268939] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com [ 0.270899] sdhci: Secure Digital Host Controller Interface driver [ 0.270904] sdhci: Copyright(c) Pierre Ossman [ 0.271385] Synopsys Designware Multimedia Card Interface Driver [ 0.272014] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.273176] ledtrig-cpu: registered to indicate activity on CPUs [ 0.274145] SMCCC: SOC_ID: ID = jep106:036b:0234 Revision = 0x00000401 [ 0.274732] tegra-bpmp bpmp: Adding to iommu group 0 [ 0.276115] tegra-bpmp bpmp: firmware: e941463f35523d12ee54-da583751bbf [ 0.452175] Freeing initrd memory: 15496K [ 3.766055] clocksource: tsc: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 3.766085] clocksource: osc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 49772407460 ns [ 3.766089] clocksource: usec: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 3.766293] hid: raw HID events driver (C) Jiri Kosina [ 3.766656] usbcore: registered new interface driver usbhid [ 3.766663] usbhid: USB HID core driver [ 3.771429] optee: probing for conduit method. [ 3.771479] optee: revision 4.2 (d78bc5fa) [ 3.830897] optee: dynamic shared memory is enabled [ 3.831169] optee: initialized driver [ 3.832983] sprd_pci_ep_dev_init Quectel_Linux&Android_SPRD_PCIE_Driver_V1.1.8 [ 3.833951] sipc: name=sprd,sipc [ 3.833956] sipc: type=1 [ 3.833958] sipc: dst =1 [ 3.833959] sipc: ep_dev=0 [ 3.833963] sipc: smem_type = 0 [ 3.834478] sipc: smem_base=0x80400000, dst_smem_base=0x80400000, smem_size=0x300000 [ 3.834492] sipc: high_offset=0x0n [ 3.834498] smsg_ipc_create: sprd,sipc [ 3.835586] smem_init: pool addr = 0x80400000, size = 0x300000 added. [ 3.835601] smsg_ipc_smem_init: ring_base = 0x80400000, ring_size = 0x1000 [ 3.837019] spipe_probe! [ 3.837023] spipe: after parse device tree, name=spipe_nr, dst=1, channel=4, ringnr=15, rxbuf_size=0x1000, txbuf_size=0x1000 [ 3.837038] sbuf_host_init: channel 1-4, offset = 0x0! [ 3.838927] smsg_ch_open: channel 1-4 send open msg! [ 3.839013] pcie res: request resource, state=0. [ 3.846863] spipe_probe! [ 3.846866] spipe: after parse device tree, name=sdiag_nr, dst=1, channel=21, ringnr=1, rxbuf_size=0x8000, txbuf_size=0x40000 [ 3.846879] sbuf_host_init: channel 1-21, offset = 0x0! [ 3.847693] smsg_ch_open: channel 1-21 send open msg! [ 3.848425] spipe_probe! [ 3.848432] spipe: after parse device tree, name=stty_nr, dst=1, channel=6, ringnr=32, rxbuf_size=0x800, txbuf_size=0x800 [ 3.848442] sbuf_host_init: channel 1-6, offset = 0x0! [ 3.849756] smsg_ch_open: channel 1-6 send open msg! [ 3.867279] spipe_probe! [ 3.867287] spipe: after parse device tree, name=snv_nr, dst=1, channel=40, ringnr=1, rxbuf_size=0x1000, txbuf_size=0x40400 [ 3.867294] sbuf_host_init: channel 1-40, offset = 0x0! [ 3.868715] smsg_ch_open: channel 1-40 send open msg! [ 3.869616] spool: name=slog_nr, dst=1, channel=5, pre_cfg=0 [ 3.869625] spool: tx_num=0, tx_size=0, rx_num=32, rx_size=65536 [ 3.870912] smsg_ch_open: channel 1-5 send open msg! [ 3.872073] usbcore: registered new interface driver snd-usb-audio [ 3.872815] NET: Registered PF_PACKET protocol family [ 3.873435] Bluetooth: RFCOMM TTY layer initialized [ 3.873451] Bluetooth: RFCOMM socket layer initialized [ 3.873473] Bluetooth: RFCOMM ver 1.11 [ 3.873709] 9pnet: Installing 9P2000 support [ 3.873819] Key type dns_resolver registered [ 3.874672] printk: console [tty0]: printing thread started [ 3.875120] printk: console [ttyTCU0]: printing thread started [ 3.875294] Loading compiled-in X.509 certificates [ 3.878496] Loaded X.509 cert 'Build time autogenerated kernel key: 101e8ea2c2636c7449124590f4c1596b809b24dc' [ 3.920842] tegra194-pcie 140c0000.pcie: <-> Tegra PCIe Controller Driver [ 3.921024] tegra194-pcie 140c0000.pcie: ltepwr_gpiod: 000000003099668d [ 3.921048] tegra194-pcie 140c0000.pcie: lterst_gpiod: 00000000af310db1 [ 3.921075] tegra194-pcie 140c0000.pcie: lteonoff_gpiod: 00000000bbf056a4 [ 3.921104] tegra194-pcie 140c0000.pcie: lte_wake_gpiod: 000000008d6ec052 [ 3.921106] tegra194-pcie 140c0000.pcie: <-> lte power down [ 4.027473] tegra194-pcie 140c0000.pcie: <-> lte power on [ 4.047087] tegra194-pcie 140c0000.pcie: <-> lte release reset [ 4.107448] tegra194-pcie 140c0000.pcie: <-> lte on [ 4.168244] tegra194-pcie 140c0000.pcie: <-> Tegra PCIe Controller Driver: mode=3 [ 4.170637] tegra194-pcie 140c0000.pcie: <-> Tegra PCIe Controller Driver: pex_prsnt_gpiod=0000000000000000 [ 4.170784] irq: IRQ222: trimming hierarchy from :bus@0:pmc@c360000 [ 4.172108] tegra194-pcie 140c0000.pcie: <-> Tegra PCIe Controller Driver: ltewake_gpiod=0000000000000000 [ 4.172127] tegra194-pcie 140c0000.pcie: <-> Tegra PCIe Controller Driver: wake_up config_rp_waitq [ 4.172810] tegra194-pcie 14100000.pcie: Adding to iommu group 1 [ 4.174913] tegra194-pcie 14100000.pcie: <-> Tegra PCIe Controller Driver [ 4.174986] tegra194-pcie 14100000.pcie: ltepwr_gpiod: 0000000000000000 [ 4.174994] tegra194-pcie 14100000.pcie: lterst_gpiod: 0000000000000000 [ 4.175000] tegra194-pcie 14100000.pcie: lteonoff_gpiod: 0000000000000000 [ 4.175008] tegra194-pcie 14100000.pcie: lte_wake_gpiod: 0000000000000000 [ 4.175589] tegra194-pcie 14100000.pcie: <-> Tegra PCIe Controller Driver: mode=3 [ 4.176806] tegra194-pcie 14100000.pcie: <-> Tegra PCIe Controller Driver: pex_prsnt_gpiod=0000000000000000 [ 4.176822] tegra194-pcie 14100000.pcie: <-> Tegra PCIe Controller Driver: tegra_pcie_config_rp [ 4.176832] <-> Configuring PCIe RP: pcie@14100000 [ 4.176835] tegra194-pcie 14100000.pcie: <-> Configuring PCIe RP: pcie@14100000 [ 4.176860] tegra194-pcie 14100000.pcie: <-> pm_runtime_get_sync: 0 [ 4.180879] tegra194-pcie 14100000.pcie: host bridge /bus@0/pcie@14100000 ranges: [ 4.180964] tegra194-pcie 14100000.pcie: MEM 0x2080000000..0x20a7ffffff -> 0x2080000000 [ 4.180981] tegra194-pcie 14100000.pcie: MEM 0x20a8000000..0x20afffffff -> 0x0040000000 [ 4.180987] tegra194-pcie 14100000.pcie: IO 0x0030100000..0x00301fffff -> 0x0030100000 [ 4.181205] tegra194-pcie 14100000.pcie: <-> tegra_pcie_dw_host_init: pcie@14100000 [ 4.181220] tegra194-pcie 14100000.pcie: <-> tegra_pcie_dw_host_init: PCI_IO_BASE=00000000 [ 4.181226] tegra194-pcie 14100000.pcie: <-> tegra_pcie_dw_host_init: PCI_PREF_MEMORY_BASE=00010001 [ 4.181233] tegra194-pcie 14100000.pcie: <-> tegra_pcie_dw_host_init: PORT_LOGIC_AMBA_ERROR_RESPONSE_DEFAULT=00009c10 [ 4.181238] tegra194-pcie 14100000.pcie: <-> tegra_pcie_dw_host_init: PCI_EXP_LNKCAP=007b4c14 [ 4.181260] tegra194-pcie 14100000.pcie: <-> tegra_pcie_dw_host_init: config_gen3_gen4_eq_presets [ 4.181283] tegra194-pcie 14100000.pcie: <-> tegra_pcie_dw_host_init: init_host_aspm [ 4.181286] tegra194-pcie 14100000.pcie: <-> tegra_pcie_dw_host_init: supports_clkreq=0 [ 4.181292] tegra194-pcie 14100000.pcie: <-> tegra_pcie_dw_host_init: pcie->of_data->has_l1ss_exit_fix=1 [ 4.181295] tegra194-pcie 14100000.pcie: <-> tegra_pcie_dw_host_init: pcie->update_fc_fixup=0 [ 4.181775] tegra194-pcie 14100000.pcie: <-> tegra_pcie_dw_host_init: finish [ 4.181813] tegra194-pcie 14100000.pcie: iATU unroll: enabled [ 4.181821] tegra194-pcie 14100000.pcie: Detected iATU regions: 8 outbound, 2 inbound [ 4.181933] tegra194-pcie 14100000.pcie: <-> tegra_pcie_dw_start_link: Assert RST [ 4.287444] tegra194-pcie 14100000.pcie: <-> tegra_pcie_dw_start_link: Enable LTSSM [ 4.287462] tegra194-pcie 14100000.pcie: <-> tegra_pcie_dw_start_link: De-assert RST [ 4.395451] tegra194-pcie 14100000.pcie: Link up [ 4.402440] tegra194-pcie 14100000.pcie: Link up [ 4.402652] tegra194-pcie 14100000.pcie: PCI host bridge to bus 0001:00 [ 4.402665] pci_bus 0001:00: root bus resource [io 0x0000-0xfffff] (bus address [0x30100000-0x301fffff]) [ 4.402676] pci_bus 0001:00: root bus resource [mem 0x20a8000000-0x20afffffff] (bus address [0x40000000-0x47ffffff]) [ 4.402687] pci_bus 0001:00: root bus resource [bus 00-ff] [ 4.402692] pci_bus 0001:00: root bus resource [mem 0x2080000000-0x20a7ffffff pref] [ 4.402798] pci 0001:00:00.0: [10de:229e] type 01 class 0x060400 [ 4.403032] pci 0001:00:00.0: PME# supported from D0 D3hot [ 4.409919] pci 0001:01:00.0: [8086:1531] type 00 class 0x020000 [ 4.410101] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x007fffff] [ 4.410254] pci 0001:01:00.0: reg 0x18: initial BAR value 0x00000000 invalid [ 4.410258] pci 0001:01:00.0: reg 0x18: [io size 0x0020] [ 4.410332] pci 0001:01:00.0: reg 0x1c: [mem 0x00000000-0x00003fff] [ 4.411512] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold [ 4.412813] tegra194-pcie 14100000.pcie: <-> tegra_pcie_rp_irq_handler: irq=193 [ 4.412823] tegra194-pcie 14100000.pcie: <-> tegra_pcie_rp_irq_handler: "pcie@14100000" [ 4.412831] tegra194-pcie 14100000.pcie: <-> tegra_pcie_rp_irq_handler: APPL_INTR_STATUS_L0_INT_INT status_l1=0x00000004 [ 4.412839] tegra194-pcie 14100000.pcie: <-> tegra_pcie_rp_irq_handler: BW_MGT_INT_STS [ 4.412845] tegra194-pcie 14100000.pcie: Link Speed : Gen-1 [ 4.412879] tegra194-pcie 14100000.pcie: <-> tegra_pcie_rp_irq_thread: irq=193 [ 4.412886] tegra194-pcie 14100000.pcie: <-> tegra_pcie_rp_irq_thread: link_status_change or link_speed_change [ 4.427007] pci 0001:00:00.0: BAR 14: assigned [mem 0x20a8000000-0x20a8bfffff] [ 4.427013] pci 0001:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.427020] pci 0001:01:00.0: BAR 0: assigned [mem 0x20a8000000-0x20a87fffff] [ 4.427057] pci 0001:01:00.0: BAR 3: assigned [mem 0x20a8800000-0x20a8803fff] [ 4.427096] pci 0001:01:00.0: BAR 2: assigned [io 0x1000-0x101f] [ 4.427132] pci 0001:00:00.0: PCI bridge to [bus 01-ff] [ 4.427139] pci 0001:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.427145] pci 0001:00:00.0: bridge window [mem 0x20a8000000-0x20a8bfffff] [ 4.427402] pcieport 0001:00:00.0: Adding to iommu group 1 [ 4.427631] pcieport 0001:00:00.0: PME: Signaling with IRQ 193 [ 4.430153] pcieport 0001:00:00.0: AER: enabled with IRQ 193 [ 4.430556] tegra194-pcie 14100000.pcie: <-> tegra_pcie_init_controller: 0 [ 4.430563] tegra194-pcie 14100000.pcie: <-> tegra_pcie_dw_link_up: 1 [ 4.430635] tegra194-pcie 14100000.pcie: <-> Tegra PCIe Controller Driver: tegra_pcie_config_rp ret=0 [ 4.430640] tegra194-pcie 14100000.pcie: <-> Tegra PCIe Controller Driver: wake_up config_rp_waitq [ 4.431475] tegra194-pcie 14160000.pcie: Adding to iommu group 2 [ 4.433023] tegra194-pcie 14160000.pcie: <-> Tegra PCIe Controller Driver [ 4.433100] tegra194-pcie 14160000.pcie: ltepwr_gpiod: 0000000000000000 [ 4.433108] tegra194-pcie 14160000.pcie: lterst_gpiod: 0000000000000000 [ 4.433115] tegra194-pcie 14160000.pcie: lteonoff_gpiod: 0000000000000000 [ 4.433121] tegra194-pcie 14160000.pcie: lte_wake_gpiod: 0000000000000000 [ 4.433948] tegra194-pcie 14160000.pcie: <-> Tegra PCIe Controller Driver: mode=3 [ 4.436528] tegra194-pcie 14160000.pcie: <-> Tegra PCIe Controller Driver: pex_prsnt_gpiod=0000000000000000 [ 4.436536] tegra194-pcie 14160000.pcie: <-> Tegra PCIe Controller Driver: tegra_pcie_config_rp [ 4.436546] <-> Configuring PCIe RP: pcie@14160000 [ 4.436550] tegra194-pcie 14160000.pcie: <-> Configuring PCIe RP: pcie@14160000 [ 4.436575] tegra194-pcie 14160000.pcie: <-> pm_runtime_get_sync: 0 [ 4.440757] tegra194-pcie 14160000.pcie: host bridge /bus@0/pcie@14160000 ranges: [ 4.440827] tegra194-pcie 14160000.pcie: MEM 0x2140000000..0x2427ffffff -> 0x2140000000 [ 4.440842] tegra194-pcie 14160000.pcie: MEM 0x2428000000..0x242fffffff -> 0x0040000000 [ 4.440849] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.441076] tegra194-pcie 14160000.pcie: <-> tegra_pcie_dw_host_init: pcie@14160000 [ 4.441089] tegra194-pcie 14160000.pcie: <-> tegra_pcie_dw_host_init: PCI_IO_BASE=00000000 [ 4.441096] tegra194-pcie 14160000.pcie: <-> tegra_pcie_dw_host_init: PCI_PREF_MEMORY_BASE=00010001 [ 4.441103] tegra194-pcie 14160000.pcie: <-> tegra_pcie_dw_host_init: PORT_LOGIC_AMBA_ERROR_RESPONSE_DEFAULT=00009c10 [ 4.441108] tegra194-pcie 14160000.pcie: <-> tegra_pcie_dw_host_init: PCI_EXP_LNKCAP=007b4c44 [ 4.441157] tegra194-pcie 14160000.pcie: <-> tegra_pcie_dw_host_init: config_gen3_gen4_eq_presets [ 4.441180] tegra194-pcie 14160000.pcie: <-> tegra_pcie_dw_host_init: init_host_aspm [ 4.441184] tegra194-pcie 14160000.pcie: <-> tegra_pcie_dw_host_init: supports_clkreq=0 [ 4.441192] tegra194-pcie 14160000.pcie: <-> tegra_pcie_dw_host_init: pcie->of_data->has_l1ss_exit_fix=1 [ 4.441196] tegra194-pcie 14160000.pcie: <-> tegra_pcie_dw_host_init: pcie->update_fc_fixup=0 [ 4.442259] tegra194-pcie 14160000.pcie: <-> tegra_pcie_dw_host_init: finish [ 4.442302] tegra194-pcie 14160000.pcie: iATU unroll: enabled [ 4.442309] tegra194-pcie 14160000.pcie: Detected iATU regions: 8 outbound, 2 inbound [ 4.442450] tegra194-pcie 14160000.pcie: <-> tegra_pcie_dw_start_link: Assert RST [ 4.547436] tegra194-pcie 14160000.pcie: <-> tegra_pcie_dw_start_link: Enable LTSSM [ 4.547445] tegra194-pcie 14160000.pcie: <-> tegra_pcie_dw_start_link: De-assert RST [ 4.655457] tegra194-pcie 14160000.pcie: Link up [ 4.666145] tegra194-pcie 14160000.pcie: Link up [ 4.666206] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.666211] pci_bus 0004:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x36100000-0x361fffff]) [ 4.666214] pci_bus 0004:00: root bus resource [mem 0x2428000000-0x242fffffff] (bus address [0x40000000-0x47ffffff]) [ 4.666217] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.666219] pci_bus 0004:00: root bus resource [mem 0x2140000000-0x2427ffffff pref] [ 4.666261] pci 0004:00:00.0: [10de:229c] type 01 class 0x060400 [ 4.666411] pci 0004:00:00.0: PME# supported from D0 D3hot [ 4.669547] pci 0004:01:00.0: [144d:a80c] type 00 class 0x010802 [ 4.669741] pci 0004:01:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit] [ 4.671582] pci 0004:01:00.0: 31.504 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x4 link at 0004:00:00.0 (capable of 63.012 Gb/s with 16.0 GT/s PCIe x4 link) [ 4.671836] tegra194-pcie 14160000.pcie: <-> tegra_pcie_rp_irq_handler: irq=195 [ 4.671840] tegra194-pcie 14160000.pcie: <-> tegra_pcie_rp_irq_handler: "pcie@14160000" [ 4.671845] tegra194-pcie 14160000.pcie: <-> tegra_pcie_rp_irq_handler: APPL_INTR_STATUS_L0_INT_INT status_l1=0x00000004 [ 4.671848] tegra194-pcie 14160000.pcie: <-> tegra_pcie_rp_irq_handler: BW_MGT_INT_STS [ 4.671851] tegra194-pcie 14160000.pcie: Link Speed : Gen-3 [ 4.671865] tegra194-pcie 14160000.pcie: <-> tegra_pcie_rp_irq_thread: irq=195 [ 4.671867] tegra194-pcie 14160000.pcie: <-> tegra_pcie_rp_irq_thread: link_status_change or link_speed_change [ 4.685848] pci 0004:00:00.0: BAR 14: assigned [mem 0x2428000000-0x24280fffff] [ 4.685853] pci 0004:01:00.0: BAR 0: assigned [mem 0x2428000000-0x2428003fff 64bit] [ 4.685938] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.685943] pci 0004:00:00.0: bridge window [mem 0x2428000000-0x24280fffff] [ 4.686032] pcieport 0004:00:00.0: Adding to iommu group 2 [ 4.686115] pcieport 0004:00:00.0: PME: Signaling with IRQ 195 [ 4.687519] pcieport 0004:00:00.0: AER: enabled with IRQ 195 [ 4.687689] tegra194-pcie 14160000.pcie: <-> tegra_pcie_init_controller: 0 [ 4.687692] tegra194-pcie 14160000.pcie: <-> tegra_pcie_dw_link_up: 1 [ 4.687711] tegra194-pcie 14160000.pcie: <-> Tegra PCIe Controller Driver: tegra_pcie_config_rp ret=0 [ 4.687713] tegra194-pcie 14160000.pcie: <-> Tegra PCIe Controller Driver: wake_up config_rp_waitq [ 4.687975] tegra194-pcie 141e0000.pcie: Adding to iommu group 3 [ 4.688754] tegra194-pcie 141e0000.pcie: <-> Tegra PCIe Controller Driver [ 4.688775] tegra194-pcie 141e0000.pcie: ltepwr_gpiod: 0000000000000000 [ 4.688780] tegra194-pcie 141e0000.pcie: lterst_gpiod: 0000000000000000 [ 4.688783] tegra194-pcie 141e0000.pcie: lteonoff_gpiod: 0000000000000000 [ 4.688787] tegra194-pcie 141e0000.pcie: lte_wake_gpiod: 0000000000000000 [ 4.688990] tegra194-pcie 141e0000.pcie: <-> Tegra PCIe Controller Driver: mode=3 [ 4.689887] tegra194-pcie 141e0000.pcie: <-> Tegra PCIe Controller Driver: pex_prsnt_gpiod=0000000000000000 [ 4.689890] tegra194-pcie 141e0000.pcie: <-> Tegra PCIe Controller Driver: tegra_pcie_config_rp [ 4.689893] <-> Configuring PCIe RP: pcie@141e0000 [ 4.689894] tegra194-pcie 141e0000.pcie: <-> Configuring PCIe RP: pcie@141e0000 [ 4.689901] tegra194-pcie 141e0000.pcie: <-> pm_runtime_get_sync: 0 [ 4.691819] tegra194-pcie 141e0000.pcie: host bridge /bus@0/pcie@141e0000 ranges: [ 4.691841] tegra194-pcie 141e0000.pcie: MEM 0x3000000000..0x3227ffffff -> 0x3000000000 [ 4.691847] tegra194-pcie 141e0000.pcie: MEM 0x3228000000..0x322fffffff -> 0x0040000000 [ 4.691851] tegra194-pcie 141e0000.pcie: IO 0x003e100000..0x003e1fffff -> 0x003e100000 [ 4.691918] tegra194-pcie 141e0000.pcie: <-> tegra_pcie_dw_host_init: pcie@141e0000 [ 4.691925] tegra194-pcie 141e0000.pcie: <-> tegra_pcie_dw_host_init: PCI_IO_BASE=00000000 [ 4.691928] tegra194-pcie 141e0000.pcie: <-> tegra_pcie_dw_host_init: PCI_PREF_MEMORY_BASE=00010001 [ 4.691932] tegra194-pcie 141e0000.pcie: <-> tegra_pcie_dw_host_init: PORT_LOGIC_AMBA_ERROR_RESPONSE_DEFAULT=00009c10 [ 4.691934] tegra194-pcie 141e0000.pcie: <-> tegra_pcie_dw_host_init: PCI_EXP_LNKCAP=007b4c14 [ 4.691952] tegra194-pcie 141e0000.pcie: <-> tegra_pcie_dw_host_init: config_gen3_gen4_eq_presets [ 4.691968] tegra194-pcie 141e0000.pcie: <-> tegra_pcie_dw_host_init: init_host_aspm [ 4.691970] tegra194-pcie 141e0000.pcie: <-> tegra_pcie_dw_host_init: supports_clkreq=0 [ 4.691974] tegra194-pcie 141e0000.pcie: <-> tegra_pcie_dw_host_init: pcie->of_data->has_l1ss_exit_fix=1 [ 4.691976] tegra194-pcie 141e0000.pcie: <-> tegra_pcie_dw_host_init: pcie->update_fc_fixup=0 [ 4.692290] tegra194-pcie 141e0000.pcie: <-> tegra_pcie_dw_host_init: finish [ 4.692318] tegra194-pcie 141e0000.pcie: iATU unroll: enabled [ 4.692320] tegra194-pcie 141e0000.pcie: Detected iATU regions: 8 outbound, 2 inbound [ 4.692411] tegra194-pcie 141e0000.pcie: <-> tegra_pcie_dw_start_link: Assert RST [ 4.799289] tegra194-pcie 141e0000.pcie: <-> tegra_pcie_dw_start_link: Enable LTSSM [ 4.799294] tegra194-pcie 141e0000.pcie: <-> tegra_pcie_dw_start_link: De-assert RST [ 4.907333] tegra194-pcie 141e0000.pcie: Link up [ 4.911161] tegra194-pcie 141e0000.pcie: Link up [ 4.911222] tegra194-pcie 141e0000.pcie: PCI host bridge to bus 0007:00 [ 4.911226] pci_bus 0007:00: root bus resource [io 0x200000-0x2fffff] (bus address [0x3e100000-0x3e1fffff]) [ 4.911229] pci_bus 0007:00: root bus resource [mem 0x3228000000-0x322fffffff] (bus address [0x40000000-0x47ffffff]) [ 4.911233] pci_bus 0007:00: root bus resource [bus 00-ff] [ 4.911234] pci_bus 0007:00: root bus resource [mem 0x3000000000-0x3227ffffff pref] [ 4.911275] pci 0007:00:00.0: [10de:229a] type 01 class 0x060400 [ 4.911421] pci 0007:00:00.0: PME# supported from D0 D3hot [ 4.914494] pci 0007:01:00.0: [8086:1531] type 00 class 0x020000 [ 4.914652] pci 0007:01:00.0: reg 0x10: [mem 0x00000000-0x007fffff] [ 4.914784] pci 0007:01:00.0: reg 0x18: [io 0x0000-0x001f] [ 4.914850] pci 0007:01:00.0: reg 0x1c: [mem 0x00000000-0x00003fff] [ 4.915894] pci 0007:01:00.0: PME# supported from D0 D3hot D3cold [ 4.916865] tegra194-pcie 141e0000.pcie: <-> tegra_pcie_rp_irq_handler: irq=197 [ 4.916869] tegra194-pcie 141e0000.pcie: <-> tegra_pcie_rp_irq_handler: "pcie@141e0000" [ 4.916873] tegra194-pcie 141e0000.pcie: <-> tegra_pcie_rp_irq_handler: APPL_INTR_STATUS_L0_INT_INT status_l1=0x00000004 [ 4.916876] tegra194-pcie 141e0000.pcie: <-> tegra_pcie_rp_irq_handler: BW_MGT_INT_STS [ 4.916879] tegra194-pcie 141e0000.pcie: Link Speed : Gen-1 [ 4.916893] tegra194-pcie 141e0000.pcie: <-> tegra_pcie_rp_irq_thread: irq=197 [ 4.916895] tegra194-pcie 141e0000.pcie: <-> tegra_pcie_rp_irq_thread: link_status_change or link_speed_change [ 4.929791] pci 0007:00:00.0: BAR 14: assigned [mem 0x3228000000-0x3228bfffff] [ 4.929795] pci 0007:00:00.0: BAR 13: assigned [io 0x200000-0x200fff] [ 4.929798] pci 0007:01:00.0: BAR 0: assigned [mem 0x3228000000-0x32287fffff] [ 4.929827] pci 0007:01:00.0: BAR 3: assigned [mem 0x3228800000-0x3228803fff] [ 4.929855] pci 0007:01:00.0: BAR 2: assigned [io 0x200000-0x20001f] [ 4.929884] pci 0007:00:00.0: PCI bridge to [bus 01-ff] [ 4.929887] pci 0007:00:00.0: bridge window [io 0x200000-0x200fff] [ 4.929891] pci 0007:00:00.0: bridge window [mem 0x3228000000-0x3228bfffff] [ 4.929981] pcieport 0007:00:00.0: Adding to iommu group 3 [ 4.930064] pcieport 0007:00:00.0: PME: Signaling with IRQ 197 [ 4.930606] pcieport 0007:00:00.0: AER: enabled with IRQ 197 [ 4.930738] tegra194-pcie 141e0000.pcie: <-> tegra_pcie_init_controller: 0 [ 4.930741] tegra194-pcie 141e0000.pcie: <-> tegra_pcie_dw_link_up: 1 [ 4.930757] tegra194-pcie 141e0000.pcie: <-> Tegra PCIe Controller Driver: tegra_pcie_config_rp ret=0 [ 4.930759] tegra194-pcie 141e0000.pcie: <-> Tegra PCIe Controller Driver: wake_up config_rp_waitq [ 4.931068] tegra-gpcdma 2600000.dma-controller: Adding to iommu group 4 [ 4.931998] tegra-gpcdma 2600000.dma-controller: GPC DMA driver register 31 channels [ 4.932998] serial-tegra 3100000.serial: RX in PIO mode [ 4.933001] serial-tegra 3100000.serial: TX in PIO mode [ 4.933040] 3100000.serial: ttyTHS1 at MMIO 0x3100000 (irq = 112, base_baud = 0) is a TEGRA_UART [ 4.933952] 3140000.serial: ttyTHS2 at MMIO 0x3140000 (irq = 113, base_baud = 0) is a TEGRA_UART [ 4.935250] tegra_rtc c2a0000.rtc: registered as rtc1 [ 4.935254] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 4.935480] tegra-i2c 3160000.i2c: Adding to iommu group 4 [ 4.937502] tegra-i2c 3180000.i2c: Adding to iommu group 4 [ 4.939043] tegra-i2c 31b0000.i2c: Adding to iommu group 4 [ 4.940331] tegra-i2c c240000.i2c: Adding to iommu group 4 [ 4.941663] tegra-i2c c250000.i2c: Adding to iommu group 4 [ 4.947418] cpufreq: cpufreq_online: CPU4: Running at unlisted initial frequency: 1765000 KHz, changing to: 1728000 KHz [ 4.950967] tegra194-pcie 140a0000.pcie: Adding to iommu group 5 [ 4.951758] tegra194-pcie 140a0000.pcie: <-> Tegra PCIe Controller Driver [ 4.951781] tegra194-pcie 140a0000.pcie: ltepwr_gpiod: 0000000000000000 [ 4.951786] tegra194-pcie 140a0000.pcie: lterst_gpiod: 0000000000000000 [ 4.951790] tegra194-pcie 140a0000.pcie: lteonoff_gpiod: 0000000000000000 [ 4.951795] tegra194-pcie 140a0000.pcie: lte_wake_gpiod: 0000000000000000 [ 4.952077] tegra194-pcie 140a0000.pcie: <-> Tegra PCIe Controller Driver: mode=3 [ 4.953394] tegra194-pcie 140a0000.pcie: <-> Tegra PCIe Controller Driver: pex_prsnt_gpiod=0000000000000000 [ 4.953398] tegra194-pcie 140a0000.pcie: <-> Tegra PCIe Controller Driver: tegra_pcie_config_rp [ 4.953401] <-> Configuring PCIe RP: pcie@140a0000 [ 4.953402] tegra194-pcie 140a0000.pcie: <-> Configuring PCIe RP: pcie@140a0000 [ 4.953412] tegra194-pcie 140a0000.pcie: <-> pm_runtime_get_sync: 0 [ 5.060340] tegra194-pcie 140a0000.pcie: host bridge /bus@0/pcie@140a0000 ranges: [ 5.060364] tegra194-pcie 140a0000.pcie: MEM 0x3240000000..0x3527ffffff -> 0x3240000000 [ 5.060371] tegra194-pcie 140a0000.pcie: MEM 0x3528000000..0x352fffffff -> 0x0040000000 [ 5.060377] tegra194-pcie 140a0000.pcie: IO 0x002a100000..0x002a1fffff -> 0x002a100000 [ 5.060458] tegra194-pcie 140a0000.pcie: <-> tegra_pcie_dw_host_init: pcie@140a0000 [ 5.060466] tegra194-pcie 140a0000.pcie: <-> tegra_pcie_dw_host_init: PCI_IO_BASE=00000000 [ 5.060469] tegra194-pcie 140a0000.pcie: <-> tegra_pcie_dw_host_init: PCI_PREF_MEMORY_BASE=00010001 [ 5.060473] tegra194-pcie 140a0000.pcie: <-> tegra_pcie_dw_host_init: PORT_LOGIC_AMBA_ERROR_RESPONSE_DEFAULT=00009c10 [ 5.060475] tegra194-pcie 140a0000.pcie: <-> tegra_pcie_dw_host_init: PCI_EXP_LNKCAP=007b4c24 [ 5.060501] tegra194-pcie 140a0000.pcie: <-> tegra_pcie_dw_host_init: config_gen3_gen4_eq_presets [ 5.060518] tegra194-pcie 140a0000.pcie: <-> tegra_pcie_dw_host_init: init_host_aspm [ 5.060519] tegra194-pcie 140a0000.pcie: <-> tegra_pcie_dw_host_init: supports_clkreq=0 [ 5.060524] tegra194-pcie 140a0000.pcie: <-> tegra_pcie_dw_host_init: pcie->of_data->has_l1ss_exit_fix=1 [ 5.060525] tegra194-pcie 140a0000.pcie: <-> tegra_pcie_dw_host_init: pcie->update_fc_fixup=0 [ 5.060870] tegra194-pcie 140a0000.pcie: <-> tegra_pcie_dw_host_init: finish [ 5.060900] tegra194-pcie 140a0000.pcie: iATU unroll: enabled [ 5.060903] tegra194-pcie 140a0000.pcie: Detected iATU regions: 8 outbound, 2 inbound [ 5.060999] tegra194-pcie 140a0000.pcie: <-> tegra_pcie_dw_start_link: Assert RST [ 5.167261] tegra194-pcie 140a0000.pcie: <-> tegra_pcie_dw_start_link: Enable LTSSM [ 5.167265] tegra194-pcie 140a0000.pcie: <-> tegra_pcie_dw_start_link: De-assert RST [ 5.275261] tegra194-pcie 140a0000.pcie: Link up [ 5.277841] tegra194-pcie 140a0000.pcie: Link up [ 5.277903] tegra194-pcie 140a0000.pcie: PCI host bridge to bus 0008:00 [ 5.277908] pci_bus 0008:00: root bus resource [io 0x300000-0x3fffff] (bus address [0x2a100000-0x2a1fffff]) [ 5.277912] pci_bus 0008:00: root bus resource [mem 0x3528000000-0x352fffffff] (bus address [0x40000000-0x47ffffff]) [ 5.277915] pci_bus 0008:00: root bus resource [bus 00-ff] [ 5.277917] pci_bus 0008:00: root bus resource [mem 0x3240000000-0x3527ffffff pref] [ 5.277962] pci 0008:00:00.0: [10de:229c] type 01 class 0x060400 [ 5.278117] pci 0008:00:00.0: PME# supported from D0 D3hot [ 5.281424] pci 0008:01:00.0: [10ec:8168] type 00 class 0x020000 [ 5.281580] pci 0008:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 5.281761] pci 0008:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit] [ 5.281878] pci 0008:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit] [ 5.282856] pci 0008:01:00.0: supports D1 D2 [ 5.282857] pci 0008:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 5.283681] tegra194-pcie 140a0000.pcie: <-> tegra_pcie_rp_irq_handler: irq=189 [ 5.283684] tegra194-pcie 140a0000.pcie: <-> tegra_pcie_rp_irq_handler: "pcie@140a0000" [ 5.283687] tegra194-pcie 140a0000.pcie: <-> tegra_pcie_rp_irq_handler: APPL_INTR_STATUS_L0_INT_INT status_l1=0x00000004 [ 5.283688] tegra194-pcie 140a0000.pcie: <-> tegra_pcie_rp_irq_handler: BW_MGT_INT_STS [ 5.283690] tegra194-pcie 140a0000.pcie: Link Speed : Gen-1 [ 5.283697] tegra194-pcie 140a0000.pcie: <-> tegra_pcie_rp_irq_thread: irq=189 [ 5.283698] tegra194-pcie 140a0000.pcie: <-> tegra_pcie_rp_irq_thread: link_status_change or link_speed_change [ 5.297886] pci 0008:00:00.0: BAR 14: assigned [mem 0x3528000000-0x35280fffff] [ 5.297889] pci 0008:00:00.0: BAR 13: assigned [io 0x300000-0x300fff] [ 5.297893] pci 0008:01:00.0: BAR 4: assigned [mem 0x3528000000-0x3528003fff 64bit] [ 5.297985] pci 0008:01:00.0: BAR 2: assigned [mem 0x3528004000-0x3528004fff 64bit] [ 5.298077] pci 0008:01:00.0: BAR 0: assigned [io 0x300000-0x3000ff] [ 5.298105] pci 0008:00:00.0: PCI bridge to [bus 01-ff] [ 5.298108] pci 0008:00:00.0: bridge window [io 0x300000-0x300fff] [ 5.298112] pci 0008:00:00.0: bridge window [mem 0x3528000000-0x35280fffff] [ 5.298204] pcieport 0008:00:00.0: Adding to iommu group 5 [ 5.298288] pcieport 0008:00:00.0: PME: Signaling with IRQ 189 [ 5.298592] pcieport 0008:00:00.0: AER: enabled with IRQ 189 [ 5.298728] tegra194-pcie 140a0000.pcie: <-> tegra_pcie_init_controller: 0 [ 5.298731] tegra194-pcie 140a0000.pcie: <-> tegra_pcie_dw_link_up: 1 [ 5.298748] tegra194-pcie 140a0000.pcie: <-> Tegra PCIe Controller Driver: tegra_pcie_config_rp ret=0 [ 5.298750] tegra194-pcie 140a0000.pcie: <-> Tegra PCIe Controller Driver: wake_up config_rp_waitq [ 5.299126] tegra-xusb 3610000.usb: Adding to iommu group 6 [ 5.315545] tegra-xusb 3610000.usb: Firmware timestamp: 2023-02-10 03:48:10 UTC [ 5.315554] tegra-xusb 3610000.usb: xHCI Host Controller [ 5.315567] tegra-xusb 3610000.usb: new USB bus registered, assigned bus number 1 [ 5.316328] tegra-xusb 3610000.usb: hcc params 0x0180ff05 hci version 0x120 quirks 0x0000000000010810 [ 5.316353] tegra-xusb 3610000.usb: irq 124, io mem 0x03610000 [ 5.316475] tegra-xusb 3610000.usb: xHCI Host Controller [ 5.316478] tegra-xusb 3610000.usb: new USB bus registered, assigned bus number 2 [ 5.316482] tegra-xusb 3610000.usb: Host supports USB 3.1 Enhanced SuperSpeed [ 5.316921] hub 1-0:1.0: USB hub found [ 5.316936] hub 1-0:1.0: 4 ports detected [ 5.317204] hub 2-0:1.0: USB hub found [ 5.317215] hub 2-0:1.0: 4 ports detected [ 5.318404] sdhci-tegra 3400000.mmc: Adding to iommu group 7 [ 5.318919] irq: IRQ231: trimming hierarchy from :bus@0:pmc@c360000 [ 5.318983] irq: IRQ232: trimming hierarchy from :bus@0:interrupt-controller@f400000-1 [ 5.319053] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 5.377580] ALSA device list: [ 5.377585] No soundcards found. [ 5.378982] sdhci-tegra 3400000.mmc: Got CD GPIO [ 5.423659] irq: IRQ233: trimming hierarchy from :bus@0:interrupt-controller@f400000-1 [ 5.423774] mmc0: SDHCI controller on 3400000.mmc [3400000.mmc] using ADMA 64-bit [ 5.424688] Freeing unused kernel memory: 7680K [ 5.424766] Run /init as init process [ 5.438971] Checking overlayfs setting... [ 5.448111] Overlayfs is disabled... [ 5.453879] Root device found: PARTUUID=9cad00e5-e503-4735-baac-612c71067a5a [ 5.651092] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 5.815250] hub 1-2:1.0: USB hub found [ 5.815718] hub 1-2:1.0: 4 ports detected [ 6.119085] usb 1-2.2: new full-speed USB device number 3 using tegra-xusb [ 8.819268] usb 1-2.3: new high-speed USB device number 4 using tegra-xusb [ 9.348378] pcie_tegra194: module verification failed: signature and/or required key missing - tainting kernel [ 9.349354] Error: Driver 'tegra194-pcie' is already registered, aborting... [ 9.394073] Error: Driver 'tegra194-p2u' is already registered, aborting... [ 9.431407] nvme 0004:01:00.0: Adding to iommu group 2 [ 9.431624] nvme nvme0: pci function 0004:01:00.0 [ 9.431688] nvme 0004:01:00.0: enabling device (0000 -> 0002) [ 9.435371] nvme nvme0: Shutdown timeout set to 10 seconds [ 9.436681] nvme nvme0: 6/0/0 default/read/poll queues [ 9.438811] nvme0n1: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 [ 9.453553] tegra-xudc 3550000.usb: Adding to iommu group 8 [ 9.816772] EXT4-fs (nvme0n1p1): recovery complete [ 9.820812] EXT4-fs (nvme0n1p1): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [ 9.826667] Rootfs mounted over PARTUUID=9cad00e5-e503-4735-baac-612c71067a5a [ 9.833317] Switching from initrd to actual rootfs [ 9.863717] systemd[1]: System time before build time, advancing clock. [ 9.882516] NET: Registered PF_INET6 protocol family [ 9.882915] Segment Routing with IPv6 [ 9.882923] In-situ OAM (IOAM) with IPv6 [ 9.893663] systemd[1]: systemd 249.11-0ubuntu3.12 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) [ 9.894011] systemd[1]: Detected architecture arm64. [ 9.894942] systemd[1]: Hostname set to . [ 9.900834] systemd[1]: Using hardware watchdog 'NVIDIA Tegra186 WDT', version 0, device /dev/watchdog [ 9.900852] systemd[1]: Set hardware watchdog to 2min. [ 10.051794] systemd[1]: /lib/systemd/system/snapd.service:23: Unknown key name 'RestartMode' in section 'Service', ignoring. [ 10.059448] systemd[1]: /etc/systemd/system/nvs-service.service:41: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. [ 10.066132] systemd[1]: /etc/systemd/system/nvargus-daemon.service:42: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. [ 10.105390] systemd[1]: Queued start job for default target Graphical Interface. [ 10.106996] systemd[1]: Created slice Slice /system/modprobe. [ 10.108412] systemd[1]: Created slice Slice /system/serial-getty. [ 10.108912] systemd[1]: Created slice Slice /system/systemd-fsck. [ 10.109236] systemd[1]: Created slice User and Session Slice. [ 10.109402] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 10.109764] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 10.109938] systemd[1]: Reached target Slice Units. [ 10.110002] systemd[1]: Reached target Mounting snaps. [ 10.110054] systemd[1]: Reached target Mounted snaps. [ 10.110111] systemd[1]: Reached target Swaps. [ 10.110173] systemd[1]: Reached target Local Verity Protected Volumes. [ 10.110329] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 10.110557] systemd[1]: Listening on LVM2 poll daemon socket. [ 10.115306] systemd[1]: Listening on RPCbind Server Activation Socket. [ 10.115663] systemd[1]: Listening on Syslog Socket. [ 10.116157] systemd[1]: Listening on fsck to fsckd communication Socket. [ 10.116301] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 10.116651] systemd[1]: Listening on Journal Audit Socket. [ 10.116837] systemd[1]: Listening on Journal Socket (/dev/log). [ 10.117060] systemd[1]: Listening on Journal Socket. [ 10.117356] systemd[1]: Listening on udev Control Socket. [ 10.117528] systemd[1]: Listening on udev Kernel Socket. [ 10.118547] systemd[1]: Mounting Huge Pages File System... [ 10.119697] systemd[1]: Mounting POSIX Message Queue File System... [ 10.160556] systemd[1]: Mounting Kernel Debug File System... [ 10.172763] systemd[1]: Mounting Kernel Trace File System... [ 10.175379] systemd[1]: Starting Journal Service... [ 10.182728] systemd[1]: Finished Availability of block devices. [ 10.184174] systemd[1]: Starting Set the console keyboard layout... [ 10.196014] systemd[1]: Starting Create List of Static Device Nodes... [ 10.197412] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... [ 10.198693] systemd[1]: Starting Load Kernel Module configfs... [ 10.200189] systemd[1]: Starting Load Kernel Module drm... [ 10.224739] systemd[1]: Starting Load Kernel Module efi_pstore... [ 10.226050] systemd[1]: Starting Load Kernel Module fuse... [ 10.227427] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 10.233873] fuse: init (API version 7.34) [ 10.247555] systemd[1]: Started Nameserver information manager. [ 10.247871] systemd[1]: Reached target Preparation for Network. [ 10.248155] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 10.250069] systemd[1]: Starting Load Kernel Modules... [ 10.251663] systemd[1]: Starting Remount Root and Kernel File Systems... [ 10.256958] nvsciipc: loading out-of-tree module taints kernel. [ 10.257968] nvsciipc: loaded module [ 10.258107] EXT4-fs (nvme0n1p1): re-mounted. Opts: (null). Quota mode: none. [ 10.264346] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 10.264872] nvmap_page_pool_init: Total RAM pages: 1950816 [ 10.264875] nvmap_page_pool_init: nvmap page pool size: 243852 pages (952 MB) [ 10.264933] nvmap_background_zero_thread: PP zeroing thread starting. [ 10.271501] tegra-host1x 13e00000.host1x: Adding to iommu group 9 [ 10.272106] host1x-context host1x-ctx.0: Adding to iommu group 10 [ 10.272226] host1x-context host1x-ctx.1: Adding to iommu group 11 [ 10.272327] host1x-context host1x-ctx.2: Adding to iommu group 12 [ 10.272427] host1x-context host1x-ctx.3: Adding to iommu group 13 [ 10.272527] host1x-context host1x-ctx.4: Adding to iommu group 14 [ 10.272618] host1x-context host1x-ctx.5: Adding to iommu group 15 [ 10.272717] host1x-context host1x-ctx.6: Adding to iommu group 16 [ 10.272817] host1x-context host1x-ctx.7: Adding to iommu group 17 [ 10.272920] host1x-context host1x-ctx.8: Adding to iommu group 18 [ 10.273023] host1x-context host1x-ctx.9: Adding to iommu group 19 [ 10.273119] host1x-context host1x-ctx.10: Adding to iommu group 20 [ 10.273219] host1x-context host1x-ctx.11: Adding to iommu group 21 [ 10.273312] host1x-context host1x-ctx.12: Adding to iommu group 22 [ 10.273405] host1x-context host1x-ctx.13: Adding to iommu group 23 [ 10.273499] host1x-context host1x-ctx.14: Adding to iommu group 24 [ 10.273597] host1x-context host1x-ctx.15: Adding to iommu group 25 [ 10.286896] systemd[1]: Starting Coldplug All udev Devices... [ 10.323251] systemd[1]: Started Journal Service. [ 10.338062] nvgpu: 17000000.gpu nvgpu_nvhost_syncpt_init:122 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 4000000 size 10000 [ 10.338062] [ 10.469064] systemd-journald[251]: Received client request to flush runtime journal. ??TCU debug prints will be routed to traces. ??[ 10.792234] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: ivc channel driver missing [ 10.792237] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: ivc channel driver missing [ 10.792239] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: ivc channel driver missing [ 10.792241] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivc channel driver missing [ 10.792243] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivc channel driver missing [ 10.792244] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: ivc channel driver missing [ 11.137965] (NULL device *): fops function table already registered [ 11.189079] Error: Driver 'tegra194-pcie' is already registered, aborting... [ 11.288598] Error: Driver 'tegra194-p2u' is already registered, aborting... ??Starting RmBootstrap Registered event_type:[0] for dce_core_ipc_type:[1] Registered event_type:[1] for dce_core_ipc_type:[3] dce_ipc State Initialized RmBootstrap completed successfully ??[ 11.347839] Error: Driver 'tegra194-p2u' is already registered, aborting... [ 11.412757] Error: Driver 'tegra194-p2u' is already registered, aborting... [ 12.719499] tegra194-pcie 140c0000.pcie: <-> tegra_pcie_ltewake_irq: ltewake_gpios=1 [ 12.719513] tegra194-pcie 140c0000.pcie: <-> Configuring PCIe RP: pcie@140c0000 [ 12.719523] tegra194-pcie 140c0000.pcie: <-> pm_runtime_get_sync: 0 [ 12.721227] tegra194-pcie 140c0000.pcie: <-> tegra_pcie_dw_host_init: pcie@140c0000 [ 12.721235] tegra194-pcie 140c0000.pcie: <-> tegra_pcie_dw_host_init: PCI_IO_BASE=00000000 [ 12.721238] tegra194-pcie 140c0000.pcie: <-> tegra_pcie_dw_host_init: PCI_PREF_MEMORY_BASE=00010001 [ 12.721241] tegra194-pcie 140c0000.pcie: <-> tegra_pcie_dw_host_init: PORT_LOGIC_AMBA_ERROR_RESPONSE_DEFAULT=00009c10 [ 12.721244] tegra194-pcie 140c0000.pcie: <-> tegra_pcie_dw_host_init: PCI_EXP_LNKCAP=007b4c14 [ 12.721262] tegra194-pcie 140c0000.pcie: <-> tegra_pcie_dw_host_init: config_gen3_gen4_eq_presets [ 12.721278] tegra194-pcie 140c0000.pcie: <-> tegra_pcie_dw_host_init: init_host_aspm [ 12.721280] tegra194-pcie 140c0000.pcie: <-> tegra_pcie_dw_host_init: supports_clkreq=0 [ 12.721284] tegra194-pcie 140c0000.pcie: <-> tegra_pcie_dw_host_init: pcie->of_data->has_l1ss_exit_fix=1 [ 12.721285] tegra194-pcie 140c0000.pcie: <-> tegra_pcie_dw_host_init: pcie->update_fc_fixup=0 [ 12.721621] tegra194-pcie 140c0000.pcie: <-> tegra_pcie_dw_host_init: finish [ 12.721744] tegra194-pcie 140c0000.pcie: <-> tegra_pcie_dw_start_link: Assert RST [ 12.827265] tegra194-pcie 140c0000.pcie: <-> tegra_pcie_dw_start_link: Enable LTSSM [ 12.827272] tegra194-pcie 140c0000.pcie: <-> tegra_pcie_dw_start_link: De-assert RST [ 13.043272] tegra194-pcie 140c0000.pcie: <-> tegra_pcie_dw_start_link: lte_wake_gpios: 1 [ 13.052229] tegra194-pcie 140c0000.pcie: <-> tegra_pcie_rp_irq_handler: irq=191 [ 13.052234] tegra194-pcie 140c0000.pcie: <-> tegra_pcie_rp_irq_handler: "pcie@140c0000" [ 13.052237] tegra194-pcie 140c0000.pcie: <-> tegra_pcie_rp_irq_handler: APPL_INTR_STATUS_L0_INT_INT status_l1=0x00000004 [ 13.052240] tegra194-pcie 140c0000.pcie: <-> tegra_pcie_rp_irq_handler: BW_MGT_INT_STS [ 13.052243] tegra194-pcie 140c0000.pcie: Link Speed : Gen-2 [ 13.052256] tegra194-pcie 140c0000.pcie: <-> tegra_pcie_rp_irq_thread: irq=191 [ 13.052258] tegra194-pcie 140c0000.pcie: <-> tegra_pcie_rp_irq_thread: link_status_change or link_speed_change [ 13.067003] sprd_ep_map_memory: get bar = 2 [ 13.086813] sipa_sender_ck_unfree: need wait remote_ready! [ 13.086816] sipa_sender_ck_unfree: need wait remote_ready! [ 13.091406] debugfs: File 'gro_enable' in directory 'seth' already present! [ 13.091618] debugfs: File 'gro_enable' in directory 'seth' already present! [ 13.091764] debugfs: File 'gro_enable' in directory 'seth' already present! [ 13.097282] tegra194-pcie 140c0000.pcie: <-> tegra_pcie_init_controller: 0 [ 13.097291] tegra194-pcie 140c0000.pcie: <-> tegra_pcie_dw_link_up: 1 [ 13.760652] tegra194-pcie 140c0000.pcie: <-> tegra_pcie_ltewake_irq: ltewake_gpios=0 [ 13.996021] using random self ethernet address [ 13.996030] using random host ethernet address [ 14.215559] using random self ethernet address [ 14.215565] using random host ethernet address [ 17.519373] tegra194-pcie 140c0000.pcie: <-> tegra_pcie_rp_irq_handler: irq=191 [ 17.519387] tegra194-pcie 140c0000.pcie: <-> tegra_pcie_rp_irq_handler: "pcie@140c0000" [ 17.519393] tegra194-pcie 140c0000.pcie: <-> tegra_pcie_rp_irq_handler: APPL_INTR_STATUS_L0_INT_INT status_l1=0x00001000 [ 17.519505] tegra194-pcie 140c0000.pcie: <-> tegra_pcie_rp_irq_handler: irq=191 [ 17.519509] tegra194-pcie 140c0000.pcie: <-> tegra_pcie_rp_irq_handler: "pcie@140c0000" [ 17.519514] tegra194-pcie 140c0000.pcie: <-> tegra_pcie_rp_irq_handler: APPL_INTR_STATUS_L0_INT_INT status_l1=0x00001000 [ 17.519553] tegra194-pcie 140c0000.pcie: <-> tegra_pcie_rp_irq_handler: irq=191 [ 17.519556] tegra194-pcie 140c0000.pcie: <-> tegra_pcie_rp_irq_handler: "pcie@140c0000" [ 17.519560] tegra194-pcie 140c0000.pcie: <-> tegra_pcie_rp_irq_handler: APPL_INTR_STATUS_L0_INT_INT status_l1=0x00001000 [ 17.519743] tegra194-pcie 140c0000.pcie: <-> tegra_pcie_rp_irq_handler: irq=191 [ 17.519746] tegra194-pcie 140c0000.pcie: <-> tegra_pcie_rp_irq_handler: "pcie@140c0000" [ 17.519749] tegra194-pcie 140c0000.pcie: <-> tegra_pcie_rp_irq_handler: APPL_INTR_STATUS_L0_INT_INT status_l1=0x00001000 [ 17.519908] tegra194-pcie 140c0000.pcie: <-> tegra_pcie_rp_irq_handler: irq=191 [ 17.519910] tegra194-pcie 140c0000.pcie: <-> tegra_pcie_rp_irq_handler: "pcie@140c0000" [ 17.519913] tegra194-pcie 140c0000.pcie: <-> tegra_pcie_rp_irq_handler: APPL_INTR_STATUS_L0_INT_INT status_l1=0x00001000 [ 17.519931] tegra194-pcie 140c0000.pcie: <-> tegra_pcie_rp_irq_handler: irq=191 [ 17.519932] tegra194-pcie 140c0000.pcie: <-> tegra_pcie_rp_irq_handler: "pcie@140c0000" [ 17.519935] tegra194-pcie 140c0000.pcie: <-> tegra_pcie_rp_irq_handler: APPL_INTR_STATUS_L0_INT_INT status_l1=0x00001000 Ubuntu 22.04.5 LTS tegra-ubuntu ttyTCU0 tegra-ubuntu login: [ 18.560022] tegra194-pcie 140c0000.pcie: <-> tegra_pcie_rp_irq_handler: irq=191 [ 18.560038] tegra194-pcie 140c0000.pcie: <-> tegra_pcie_rp_irq_handler: "pcie@140c0000" [ 18.560043] tegra194-pcie 140c0000.pcie: <-> tegra_pcie_rp_irq_handler: APPL_INTR_STATUS_L0_INT_INT status_l1=0x00001000 [ 23.451449] tegra194-pcie 140c0000.pcie: <-> tegra_pcie_rp_irq_handler: irq=191 [ 23.451468] tegra194-pcie 140c0000.pcie: <-> tegra_pcie_rp_irq_handler: "pcie@140c0000" [ 23.451476] tegra194-pcie 140c0000.pcie: <-> tegra_pcie_rp_irq_handler: APPL_INTR_STATUS_L0_INT_INT status_l1=0x00001000 [ 23.451913] tegra194-pcie 140c0000.pcie: <-> tegra_pcie_rp_irq_handler: irq=191 [ 23.451919] tegra194-pcie 140c0000.pcie: <-> tegra_pcie_rp_irq_handler: "pcie@140c0000" [ 23.451926] tegra194-pcie 140c0000.pcie: <-> tegra_pcie_rp_irq_handler: APPL_INTR_STATUS_L0_INT_INT status_l1=0x00001000 [ 24.639891] tegra194-pcie 140c0000.pcie: <-> tegra_pcie_rp_irq_handler: irq=191 [ 24.639908] tegra194-pcie 140c0000.pcie: <-> tegra_pcie_rp_irq_handler: "pcie@140c0000" [ 24.639915] tegra194-pcie 140c0000.pcie: <-> tegra_pcie_rp_irq_handler: APPL_INTR_STATUS_L0_INT_INT status_l1=0x00001000 [ 25.625229] tegra194-pcie 140c0000.pcie: <-> tegra_pcie_rp_irq_handler: irq=191 [ 25.625243] tegra194-pcie 140c0000.pcie: <-> tegra_pcie_rp_irq_handler: "pcie@140c0000" [ 25.625249] tegra194-pcie 140c0000.pcie: <-> tegra_pcie_rp_irq_handler: APPL_INTR_STATUS_L0_INT_INT status_l1=0x00001000 [ 29.797903] tegra194-pcie 140c0000.pcie: <-> tegra_pcie_rp_irq_handler: irq=191 [ 29.797920] tegra194-pcie 140c0000.pcie: <-> tegra_pcie_rp_irq_handler: "pcie@140c0000" [ 29.797926] tegra194-pcie 140c0000.pcie: <-> tegra_pcie_rp_irq_handler: APPL_INTR_STATUS_L0_INT_INT status_l1=0x00010000 [ 29.849771] Disable interrupt bit = 0x3 set failed! [ 29.849790] Disable interrupt bit = 0x3 set failed! [ 29.849792] virt_sipa virt_sipa: sipa overflow on ep [ 29.849960] tegra194-pcie 140c0000.pcie: <-> tegra_pcie_rp_irq_handler: irq=191 [ 29.849964] tegra194-pcie 140c0000.pcie: <-> tegra_pcie_rp_irq_handler: "pcie@140c0000" [ 29.849969] tegra194-pcie 140c0000.pcie: <-> tegra_pcie_rp_irq_handler: APPL_INTR_STATUS_L0_INT_INT status_l1=0x00010004 [ 29.849972] tegra194-pcie 140c0000.pcie: <-> tegra_pcie_rp_irq_handler: BW_MGT_INT_STS [ 29.849977] tegra194-pcie 140c0000.pcie: Link Speed : Gen-2 [ 29.849997] Disable interrupt bit = 0x3 set failed! [ 29.850010] Disable interrupt bit = 0x3 set failed! [ 29.850011] virt_sipa virt_sipa: sipa overflow on ep [ 29.850170] virt_sipa virt_sipa: phy addr is null = 0 [ 29.850218] update tx fifo rptr fail !!! [ 29.850229] virt_sipa virt_sipa: recv addr is null, but recv_array addr:0x2fbfe0800 [ 29.850256] sipa_dummy: sipa no data [ 29.851239] pcieport 0009:00:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Transmitter ID) [ 29.851264] pcieport 0009:00:00.0: device [10de:229c] error status/mask=00001001/0000e000 [ 29.851288] pcieport 0009:00:00.0: [ 0] RxErr (First) [ 29.851333] pcieport 0009:00:00.0: [12] Timeout [ 29.851499] pcieport 0009:00:00.0: PCIe Bus Error: severity=Uncorrected (Fatal), type=Transaction Layer, (Requester ID) [ 29.851501] pcieport 0009:00:00.0: device [10de:229c] error status/mask=00004020/00400000 [ 29.851510] pcieport 0009:00:00.0: [ 5] SDES [ 29.851512] pcieport 0009:00:00.0: [14] CmpltTO (First) [ 29.851789] tegra194-pcie 140c0000.pcie: <-> tegra_pcie_rp_irq_thread: irq=191 [ 29.851880] tegra194-pcie 140c0000.pcie: <-> tegra_pcie_rp_irq_thread: link_status_change or link_speed_change [ 34.917885] tegra194-pcie 140c0000.pcie: <-> tegra_pcie_ltewake_irq: ltewake_gpios=1 [ 35.960680] tegra194-pcie 140c0000.pcie: <-> tegra_pcie_ltewake_irq: ltewake_gpios=0